Add makefiles to build a w32 development package.
authorWerner Koch <wk@gnupg.org>
Fri, 11 Jun 2010 13:51:11 +0000 (13:51 +0000)
committerWerner Koch <wk@gnupg.org>
Fri, 11 Jun 2010 13:51:11 +0000 (13:51 +0000)
scripts/gpg-w32-dev/GNUmakefile [new file with mode: 0644]
scripts/gpg-w32-dev/README [new file with mode: 0644]
scripts/gpg-w32-dev/speedo.mk [new file with mode: 0644]

diff --git a/scripts/gpg-w32-dev/GNUmakefile b/scripts/gpg-w32-dev/GNUmakefile
new file mode 100644 (file)
index 0000000..f6502c2
--- /dev/null
@@ -0,0 +1,142 @@
+# Makefile - Makefile for speedo
+# Copyright (C) 2008 g10 Code GmbH
+# 
+# This file is part of speedo.
+# 
+# speedo is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+# 
+# speedo is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+
+# speedo builds gnupg-related packages from SVN and installs them in a
+# user directory, thereby providing a non-obstrusive test environment.
+# The build system is similar to that of gpg4win.  The following commands
+# are supported:
+#
+# make all  or  make
+#
+# Builds all packages and installs them under playground/install.
+# At the end, speedo prints commands that can be executed in the local shell
+# to make use of the installed packages.
+#
+# make clean  or  make clean-PACKAGE
+#
+# Removes all packages or the package PACKAGE from the installation
+# and build tree.  A subsequent make will rebuild these (and only
+# these) packages.
+#
+# make report  or make report-PACKAGE
+#
+# Lists packages and versions.
+#
+# make dist
+# 
+# Create a development ZIP archive.
+
+
+# --------
+
+# The packages that should be built.  The order is also the build order.
+speedo_spkgs = libgpg-error libgcrypt libassuan libksba gpgme
+
+# For each package, the following variables can be defined:
+#
+# speedo_pkg_PACKAGE_svn: The SVN repository that should be built.
+# Branches or specific revisions can also be specified.
+#
+# speedo_pkg_PACKAGE_tar: URL to the tar file that should be built.
+# 
+# Exactly one of the above variables is required.  Note that this
+# version of speedo does not cache repositories or tar files, and does
+# not test the integrity of the downloaded software.  If you care
+# about this, you can also specify filenames to locally verified files.
+# Filenames are differentiated from URLs by starting with a slash '/'.
+#
+# speedo_pkg_PACKAGE_configure: Extra arguments to configure.
+#
+# speedo_pkg_PACKAGE_make_args: Extra arguments to make.
+#
+# speedo_pkg_PACKAGE_make_args_inst: Extra arguments to make install.
+#
+# Note that you can override the defaults in this file in a local file
+# "config.mk"
+
+# Set this to "svn" or "release".
+WHAT=release
+
+ifeq ($(WHAT),svn)
+  svnrep = svn://cvs.gnupg.org/
+  speedo_pkg_libgpg_error_svn = $(svnrep)/libgpg-error/trunk
+  speedo_pkg_libassuan_svn = $(svnrep)/libassuan/trunk
+  speedo_pkg_libgcrypt_svn = $(svnrep)/libgcrypt/trunk
+  speedo_pkg_libksba_svn = $(svnrep)/libksba/trunk
+  speedo_pkg_gpgme_svn = $(svnrep)/gpgme/trunk
+else
+  pkgrep = ftp://ftp.gnupg.org/gcrypt
+  speedo_pkg_libgpg_error_tar = $(pkgrep)/libgpg-error/libgpg-error-1.8.tar.bz2
+  speedo_pkg_libassuan_tar = $(pkgrep)/libassuan/libassuan-2.0.0.tar.bz2
+  speedo_pkg_libgcrypt_tar = $(pkgrep)/libgcrypt/libgcrypt-1.4.5.tar.bz2
+  speedo_pkg_libksba_tar = $(pkgrep)/libksba/libksba-1.0.7.tar.bz2
+  speedo_pkg_gpgme_tar = $(pkgrep)/gpgme/gpgme-1.3.0.tar.bz2
+endif
+
+speedo_pkg_gnupg_configure = --with-pinentry-pgm=$(idir)/bin/pinentry \
+  --with-dirmngr-pgm=$(idir)/bin/dirmngr
+
+speedo_pkg_dirmngr_configure = --localstatedir=/var --sysconfdir=/etc \
+  --with-libgcrypt-prefix=$(idir) --with-gpg-error-prefix=$(idir) \
+  --with-libassuan-prefix=$(idir) --with-libksba-prefix=$(idir)
+
+speedo_pkg_gpgme_configure = --with-gpg=$(idir)/bin/gpg2       \
+       --with-gpgsm=$(idir)/bin/gpgsm                          \
+       --with-gpgconf=$(idir)/bin/gpgconf
+
+speedo_pkg_pinentry_configure = --disable-pinentry-qt4
+
+speedo_pkg_libgcrypt_configure = --disable-static
+
+speedo_pkg_libksba_configure = --disable-static
+
+
+# ---------
+
+all: all-speedo
+       @echo export PATH=\"$(idir)/bin\":\$$PATH
+       @echo export LD_LIBRARY_PATH=\"$(idir)/lib\":\$$LD_LIBRARY_PATH
+       @echo hash -r
+
+report: report-speedo
+
+clean: clean-speedo
+
+
+dist: all
+       set -e; date=$$(date -u +%Y%m%d); pkgname=gpg-w32-dev-$$date; \
+       rm -rf $$pkgname $${pkgname}.zip || true; \
+       cp -rL playground/install $${pkgname}; \
+       rm -r $${pkgname}/share/info || true; \
+       mkdir -p $${pkgname}/share/doc/gpg-w32-dev ;\
+       echo "Included versions:" > $${pkgname}/README.txt ; \
+       echo ""                   >> $${pkgname}/README.txt ; \
+       $(MAKE) --no-print-directory report \
+              | awk '{print $$2}' >> $${pkgname}/README.txt ; \
+       cp GNUmakefile speedo.mk $${pkgname}/README.txt \
+                  $${pkgname}/share/doc/gpg-w32-dev/ ; \
+       i586-mingw32msvc-strip $${pkgname}/bin/*.dll ; \
+       zip -r9 $${pkgname}.zip $${pkgname} >/dev/null ; \
+       rm -rf $$pkgname; \
+       echo "$$pkgname.zip ready for distribution" >&2
+
+
+speedo_build_list = $(speedo_spkgs)
+
+-include config.mk
+include speedo.mk
diff --git a/scripts/gpg-w32-dev/README b/scripts/gpg-w32-dev/README
new file mode 100644 (file)
index 0000000..ac2ffeb
--- /dev/null
@@ -0,0 +1,6 @@
+These makefiles are used to build a simple development package of
+GnuPG related libraries for Windoze.  The ZIP archive includes only
+the binaries, import libraries and header files.  On a file server you
+should keep the original source tarballs close to the archive file and
+explain where to find the sources.  GNU make is required.
+
diff --git a/scripts/gpg-w32-dev/speedo.mk b/scripts/gpg-w32-dev/speedo.mk
new file mode 100644 (file)
index 0000000..4e0e63a
--- /dev/null
@@ -0,0 +1,168 @@
+# speedo.mk - Speedo rebuilds speedily.
+# Copyright (C) 2008 g10 Code GmbH
+# 
+# This file is part of speedo.
+# 
+# speedo is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+# 
+# speedo is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+
+MKDIR=mkdir
+STOW=stow
+
+# These paths must be absolute, as we switch directories pretty often.
+root := $(shell pwd)/playground
+bdir := $(root)/build
+idir := $(root)/install
+ipdir := $(root)/install/pkgs
+
+# The playground area is our scratch area, where we unpack, build and
+# install the packages.
+stamps/stamp-directories:
+       $(MKDIR) stamps
+       $(MKDIR) playground
+       $(MKDIR) $(bdir)
+       $(MKDIR) $(idir)
+       #$(MKDIR) $(ipdir)
+       touch stamps/stamp-directories
+
+# Frob the name $1 by converting all '-' and '+' characters to '_'.
+define FROB_macro
+$(subst +,_,$(subst -,_,$(1)))
+endef
+
+# Get the variable $(1) (which may contain '-' and '+' characters).
+define GETVAR
+$($(call FROB_macro,$(1)))
+endef
+
+# Set a couple of common variables.
+define SETVARS
+       pkg="$(1)";                                                     \
+       svn="$(call GETVAR,speedo_pkg_$(1)_svn)";                       \
+       tar="$(call GETVAR,speedo_pkg_$(1)_tar)";                       \
+       pkgsdir="$(bdir)/$(1)";                                         \
+       pkgbdir="$(bdir)/$(1)-build";                                   \
+       pkgidir="$(ipdir)/$(1)";                                        \
+       pkgcfg="$(call GETVAR,speedo_pkg_$(1)_configure)";              \
+       pkgmkargs="$(call GETVAR,speedo_pkg_$(1)_make_args)";           \
+       pkgmkargs_inst="$(call GETVAR,speedo_pkg_$(1)_make_args_inst)"; \
+       export PATH="$(idir)/bin:$${PATH}";                             \
+       export LD_LIBRARY_PATH="$(idir)/lib:$${LD_LIBRARY_PATH}"
+endef
+
+
+# Template for source packages.
+
+define SPKG_template
+
+stamps/stamp-$(1)-00-unpack: stamps/stamp-directories 
+       (cd $(bdir);                                    \
+        $(call SETVARS,$(1));                          \
+        if [ -n "$$$${svn}" ]; then                    \
+           svn checkout "$$$${svn}" "$$$${pkg}";       \
+          cd "$$$${pkg}";                              \
+          ./autogen.sh;                                \
+         elif [ -n "$$$${tar}" ]; then                 \
+           case "$$$${tar}" in                         \
+             (*.gz) opt=z ;;                           \
+             (*.bz2) opt=j ;;                          \
+             (*) opt= ;;                               \
+           esac;                                       \
+           case "$$$${tar}" in                         \
+            (/*) cmd=cat ;;                            \
+            (*) cmd="wget -q -O -" ;;                  \
+          esac;                                        \
+          $$$${cmd} "$$$${tar}" | tar x$$$${opt}f - ;  \
+          base=`echo "$$$${tar}" | sed -e 's,^.*/,,'   \
+                 | sed -e 's,\.tar.*$$$$,,'`;          \
+          mv $$$${base} $(1);                          \
+         fi)
+       touch stamps/stamp-$(1)-00-unpack
+
+stamps/stamp-$(1)-01-configure: stamps/stamp-$(1)-00-unpack
+       ($(call SETVARS,$(1));                          \
+        mkdir "$$$${pkgbdir}";                         \
+        cd "$$$${pkgbdir}";                            \
+        eval "../$$$${pkg}/configure"                  \
+               --enable-maintainer-mode                \
+               --prefix="$(idir)"              \
+               --host=i586-mingw32msvc         \
+               $$$${pkgcfg})
+       touch stamps/stamp-$(1)-01-configure
+
+stamps/stamp-$(1)-02-make: stamps/stamp-$(1)-01-configure
+       ($(call SETVARS,$(1));                          \
+         cd "$$$${pkgbdir}";                           \
+         $(MAKE) $$$${pkgmkargs})
+       touch stamps/stamp-$(1)-02-make
+
+# Note that post_install must come last because it may be empty and
+# "; ;" is a syntax error.
+stamps/stamp-$(1)-03-install: stamps/stamp-$(1)-02-make
+       ($(call SETVARS,$(1));                          \
+         cd "$$$${pkgbdir}";                           \
+         $(MAKE) $$$${pkgmkargs_inst} install-strip ; \
+         $(call gpg4win_pkg_$(call FROB_macro,$(1))_post_install))
+       touch stamps/stamp-$(1)-03-install
+
+stamps/stamp-final-$(1): stamps/stamp-$(1)-03-install
+       touch stamps/stamp-final-$(1)
+
+.PHONY : clean-$(1)
+clean-$(1):
+       ($(call SETVARS,$(1));                          \
+        (cd $(ipdir) &&                                \
+         ($(STOW) -D "$$$${pkg}";                      \
+          rm -fR "$$$${pkg}"));                        \
+        rm -fR "$$$${pkgsdir}" "$$$${pkgbdir}")
+       rm -f stamps/stamp-final-$(1) stamps/stamp-$(1)-*
+
+.PHONY : report-$(1)
+report-$(1):
+       @($(call SETVARS,$(1));                         \
+        echo -n $(1):\  ;                              \
+        if [ -n "$$$${svn}" ]; then                    \
+           if [ -e .svn ]; then                                \
+            cd $(bdir)/$(1) &&                         \
+             svn info | grep Repository ;              \
+          else                                         \
+             echo missing;                             \
+          fi                                           \
+         elif [ -n "$$$${tar}" ]; then                 \
+          base=`echo "$$$${tar}" | sed -e 's,^.*/,,'   \
+                 | sed -e 's,\.tar.*$$$$,,'`;          \
+          echo $$$${base} ;                            \
+         fi)
+
+endef
+
+
+# Insert the template for each source package.
+$(foreach spkg, $(speedo_spkgs), $(eval $(call SPKG_template,$(spkg))))
+
+stamps/stamp-final: stamps/stamp-directories
+stamps/stamp-final: $(addprefix stamps/stamp-final-,$(speedo_build_list))
+       touch stamps/stamp-final
+
+all-speedo: stamps/stamp-final
+
+report-speedo: $(addprefix report-,$(speedo_build_list))
+
+# Just to check if we catched all stamps.
+clean-stamps:
+       $(RM) -fR $(stamps)
+
+clean-speedo:
+       $(RM) -fR playground stamps
+
+.PHONY : all-speedo report-speedo clean-stamps clean-speedo