build: Make autogen.sh more POSIX friendly (next try)

[gnupg.git] / NEWS

Noteworthy changes in version 2.1.18 (unreleased)
-------------------------------------------------


Noteworthy changes in version 2.1.17 (2016-12-20)
-------------------------------------------------

 * gpg: By default new keys expire after 2 years.

 * gpg: New command --quick-set-expire to conveniently change the
   expiration date of keys.

 * gpg: Option and command names have been changed for easier
   comprehension.  The old names are still available as aliases.

 * gpg: Improved the TOFU trust model.

 * gpg: New option --default-new-key-algo.

 * scd: Support OpenPGP card V3 for RSA.

 * dirmngr: Support for the ADNS library has been removed.  Instead
   William Ahern's Libdns is now source included and used on all
   platforms.  This enables Tor support on all platforms.  The new
   option --standard-resolver can be used to disable this code at
   runtime.  In case of build problems the new configure option
   --disable-libdns can be used to build without Libdns.

 * dirmngr: Lazily launch ldap reaper thread.

 * tools: New options --check and --status-fd for gpg-wks-client.

 * The UTF-8 byte order mark is now skipped when reading conf files.

 * Fixed many bugs and regressions.

 * Major improvements to the test suite.  For example it is possible
   to run the external test suite of GPGME.

 See-also: gnupg-announce/2016q4/000400.html


Noteworthy changes in version 2.1.16 (2016-11-18)
-------------------------------------------------

 * gpg: New algorithm for selecting the best ranked public key when
   using a mail address with -r, -R, or --locate-key.

 * gpg: New option --with-tofu-info to print a new "tfs" record in
   colon formatted key listings.

 * gpg: New option --compliance as an alternative way to specify
   options like --rfc2440, --rfc4880, et al.

 * gpg: Many changes to the TOFU implementation.

 * gpg: Improve usability of --quick-gen-key.

 * gpg: In --verbose mode print a diagnostic when a pinentry is
   launched.

 * gpg: Remove code which warns for old versions of gnome-keyring.

 * gpg: New option --override-session-key-fd.

 * gpg: Option --output does now work with --verify.

 * gpgv: New option --output to allow saving the verified data.

 * gpgv: New option --enable-special-filenames.

 * agent, dirmngr: New --supervised mode for use by systemd and alike.

 * agent: By default listen on all available sockets using standard
   names.

 * agent: Invoke scdaemon with --homedir.

 * dirmngr: On Linux now detects the removal of its own socket and
   terminates.

 * scd: Support ECC key generation.

 * scd: Support more card readers.

 * dirmngr: New option --allow-version-check to download a software
   version database in the background.

 * dirmngr: Use system provided CAs if no --hkp-cacert is given.

 * dirmngr: Use a default keyserver if none is explicitly set

 * gpgconf: New command --query-swdb to check software versions
   against an copy of an online database.

 * gpgconf: Print the socket directory with --list-dirs.

 * tools: The WKS tools now support draft version -02.

 * tools: Always build gpg-wks-client and install under libexec.

 * tools: New option --supported for gpg-wks-client.

 * The log-file option now accepts a value "socket://" to log to the
   socket named "S.log" in the standard socket directory.

 * Provide fake pinentries for use by tests cases of downstream
   developers.

 * Fixed many bugs and regressions.

 * Many changes and improvements for the test suite.

 See-also: gnupg-announce/2016q4/000398.html


Noteworthy changes in version 2.1.15 (2016-08-18)
-------------------------------------------------

 * gpg: Remove the --tofu-db-format option and support for the split
   TOFU database.

 * gpg: Add option --sender to prepare for coming features.

 * gpg: Add option --input-size-hint to help progress indicators.

 * gpg: Extend the PROGRESS status line with the counted unit.

 * gpg: Avoid publishing the GnuPG version by default with --armor.

 * gpg: Properly ignore legacy keys in the keyring cache.

 * gpg: Always print fingerprint records in --with-colons mode.

 * gpg: Make sure that keygrips are printed for each subkey in
   --with-colons mode.

 * gpg: New import filter "drop-sig".

 * gpgsm: Fix a bug in the machine-readable key listing.

 * gpg,gpgsm: Block signals during keyring updates to limits the
   effects of a Ctrl-C at the wrong time.

 * g13: Add command --umount and other fixes for dm-crypt.

 * agent: Fix regression in SIGTERM handling.

 * agent: Cleanup of the ssh-agent code.

 * agent: Allow import of overly long keys.

 * scd: Fix problems with card removal.

 * dirmngr: Remove all code for running as a system service.

 * tools: Make gpg-wks-client conforming to the specs.

 * tests: Improve the output of the new regression test tool.

 * tests: Distribute the standalone test runner.

 * tests: Run each test in a clean environment.

 * Spelling and grammar fixes.

 See-also: gnupg-announce/2016q3/000396.html


Noteworthy changes in version 2.1.14 (2016-07-14)
-------------------------------------------------

 * gpg: Removed options --print-dane-records and --print-pka-records.
   The new export options "export-pka" and "export-dane" can instead
   be used with the export command.

 * gpg: New options --import-filter and --export-filter.

 * gpg: New import options "import-show" and "import-export".

 * gpg: New option --no-keyring.

 * gpg: New command --quick-revuid.

 * gpg: New options -f/--recipient-file and -F/--hidden-recipient-file
   to directly specify encryption keys.

 * gpg: New option --mimemode to indicate that the content is a MIME
   part.  Does only enable --textmode right now.

 * gpg: New option --rfc4880bis to allow experiments with proposed
   changes to the current OpenPGP specs.

 * gpg: Fix regression in the "fetch" sub-command of --card-edit.

 * gpg: Fix regression since 2.1 in option --try-all-secrets.

 * gpgv: Change default options for extra security.

 * gpgsm: No more root certificates are installed by default.

 * agent: "updatestartuptty" does now affect more environment
   variables.

 * scd: The option --homedir does now work with scdaemon.

 * scd: Support some more GEMPlus card readers.

 * gpgtar: Fix handling of '-' as file name.

 * gpgtar: New commands --create and --extract.

 * gpgconf: Tweak for --list-dirs to better support shell scripts.

 * tools: Add programs gpg-wks-client and gpg-wks-server to implement
   a Web Key Service.  The configure option --enable-wks-tools is
   required to build them; they should be considered Beta software.

 * tests: Complete rework of the openpgp part of the test suite.  The
   test scripts have been changed from Bourne shell scripts to Scheme
   programs.  A customized scheme interpreter (gpgscm) is included.
   This change was triggered by the need to run the test suite on
   non-Unix platforms.

 * The rendering of the man pages has been improved.

 See-also: gnupg-announce/2016q3/000393.html


Noteworthy changes in version 2.1.13 (2016-06-16)
-------------------------------------------------

 * gpg: New command --quick-addkey.  Extend the --quick-gen-key
   command.

 * gpg: New --keyid-format "none" which is now also the default.

 * gpg: New option --with-subkey-fingerprint.

 * gpg: Include Signer's UID subpacket in signatures if the secret key
   has been specified using a mail address and the new option
   --disable-signer-uid is not used.

 * gpg: Allow unattended deletion of a secret key.

 * gpg: Allow export of non-passphrase protected secret keys.

 * gpg: New status lines KEY_CONSIDERED and NOTATION_FLAGS.

 * gpg: Change status line TOFU_STATS_LONG to use '~' as
   a non-breaking-space character.

 * gpg: Speedup key listings in Tofu mode.

 * gpg: Make sure that the current and total values of a PROGRESS
   status line are small enough.

 * gpgsm: Allow the use of AES192 and SERPENT ciphers.

 * dirmngr: Adjust WKD lookup to current specs.

 * dirmngr: Fallback to LDAP v3 if v2 is is not supported.

 * gpgconf: New commands --create-socketdir and --remove-socketdir,
   new option --homedir.

 * If a /run/user/$UID directory exists, that directory is now used
   for IPC sockets instead of the GNUPGHOME directory.  This fixes
   problems with NFS and too long socket names and thus avoids the
   need for redirection files.

 * The Speedo build systems now uses the new versions.gnupg.org server
   to retrieve the default package versions.

 * Fix detection of libusb on FreeBSD.

 * Speedup fd closing after a fork.

 See-also: gnupg-announce/2016q2/000390.html


Noteworthy changes in version 2.1.12 (2016-05-04)
-------------------------------------------------

 * gpg: New --edit-key sub-command "change-usage" for testing
   purposes.

 * gpg: Out of order key-signatures are now systematically detected
   and fixed by --edit-key.

 * gpg: Improved detection of non-armored messages.

 * gpg: Removed the extra prompt needed to create Curve25519 keys.

 * gpg: Improved user ID selection for --quick-sign-key.

 * gpg: Use the root CAs provided by the system with --fetch-key.

 * gpg: Add support for the experimental Web Key Directory key
   location service.

 * gpg: Improve formatting of Tofu messages and emit new Tofu specific
   status lines.

 * gpgsm: Add option --pinentry-mode to support a loopback pinentry.

 * gpgsm: A new pubring.kbx is now created with the header blob so
   that gpg can detect that the keybox format needs to be used.

 * agent: Add read support for the new private key protection format
   openpgp-s2k-ocb-aes.

 * agent: Add read support for the new extended private key format.

 * agent: Default to --allow-loopback-pinentry and add option
   --no-allow-loopback-pinentry.

 * scd: Changed to use the new libusb 1.0 API for the internal CCID
   driver.

 * dirmngr: The dirmngr-client does now auto-detect the PEM format.

 * g13: Add experimental support for dm-crypt.

 * w32: Tofu support is now available with the Speedo build method.

 * w32: Removed the need for libiconv.dll.

 * The man pages for gpg and gpgv are now installed under the correct
   name (gpg2 or gpg - depending on a configure option).

 * Lots of internal cleanups and bug fixes.

 See-also: gnupg-announce/2016q2/000387.html


Noteworthy changes in version 2.1.11 (2016-01-26)
-------------------------------------------------

 * gpg: New command --export-ssh-key to replace the gpgkey2ssh tool.

 * gpg: Allow to generate mail address only keys with --gen-key.

 * gpg: "--list-options show-usage" is now the default.

 * gpg: Make lookup of DNS CERT records holding an URL work.

 * gpg: Emit PROGRESS status lines during key generation.

 * gpg: Don't check for ambigious or non-matching key specification in
   the config file or given to --encrypt-to.  This feature will return
   in 2.3.x.

 * gpg: Lock keybox files while updating them.

 * gpg: Solve rare error on Windows during keyring and Keybox updates.

 * gpg: Fix possible keyring corruption. (bug#2193)

 * gpg: Fix regression of "bkuptocard" sub-command in --edit-key and
   remove "checkbkupkey" sub-command introduced with 2.1.  (bug#2169)

 * gpg: Fix internal error in gpgv when using default keyid-format.

 * gpg: Fix --auto-key-retrieve to work with dirmngr.conf configured
   keyservers. (bug#2147).

 * agent: New option --pinentry-timeout.

 * scd: Improve unplugging of USB readers under Windows.

 * scd: Fix regression for generating RSA keys on card.

 * dirmmgr: All configured keyservers are now searched.

 * dirmngr: Install CA certificate for hkps.pool.sks-keyservers.net.
   Use this certiticate even if --hkp-cacert is not used.

 * gpgtar: Add actual encryption code.  gpgtar does now fully replace
   gpg-zip.

 * gpgtar: Fix filename encoding problem on Windows.

 * Print a warning if a GnuPG component is using an older version of
   gpg-agent, dirmngr, or scdaemon.

 See-also: gnupg-announce/2016q1/000383.html


Noteworthy changes in version 2.1.10 (2015-12-04)
-------------------------------------------------

 * gpg: New trust models "tofu" and "tofu+pgp".

 * gpg: New command --tofu-policy.  New options --tofu-default-policy
   and --tofu-db-format.

 * gpg: New option --weak-digest to specify hash algorithms which
   should be considered weak.

 * gpg: Allow the use of multiple --default-key options; take the last
   available key.

 * gpg: New option --encrypt-to-default-key.

 * gpg: New option --unwrap to only strip the encryption layer.

 * gpg: New option --only-sign-text-ids to exclude photo IDs from key
   signing.

 * gpg: Check for ambigious or non-matching key specification in the
   config file or given to --encrypt-to.

 * gpg: Show the used card reader with --card-status.

 * gpg: Print export statistics and an EXPORTED status line.

 * gpg: Allow selecting subkeys by keyid in --edit-key.

 * gpg: Allow updating the expiration time of multiple subkeys at
   once.

 * dirmngr: New option --use-tor.  For full support this requires
   libassuan version 2.4.2 and a patched version of libadns
   (e.g. adns-1.4-g10-7 as used by the standard Windows installer).

 * dirmngr: New option --nameserver to specify the nameserver used in
   Tor mode.

 * dirmngr: Keyservers may again be specified by IP address.

 * dirmngr: Fixed problems in resolving keyserver pools.

 * dirmngr: Fixed handling of premature termination of TLS streams so
   that large numbers of keys can be refreshed via hkps.

 * gpg: Fixed a regression in --locate-key [since 2.1.9].

 * gpg: Fixed another bug for keyrings with legacy keys.

 * gpgsm: Allow combinations of usage flags in --gen-key.

 * Make tilde expansion work with most options.

 * Many other cleanups and bug fixes.

 See-also: gnupg-announce/2015q4/000381.html


Noteworthy changes in version 2.1.9 (2015-10-09)
------------------------------------------------

 * gpg: Allow fetching keys via OpenPGP DANE (--auto-key-locate).  New
   option --print-dane-records.  [Update: --print-dane-records replaced
   in 2.1.4.]

 * gpg: Fix for a problem with PGP-2 keys in a keyring.

 * gpg: Fail with an error instead of a warning if a modern cipher
   algorithm is used without a MDC.

 * agent: New option --pinentry-invisible-char.

 * agent: Always do a RSA signature verification after creation.

 * agent: Fix a regression in ssh-add-ing Ed25519 keys.

 * agent: Fix ssh fingerprint computation for nistp384 and EdDSA.

 * agent: Fix crash during passphrase entry on some platforms.

 * scd: Change timeout to fix problems with some 2.1 cards.

 * dirmngr: Displayed name is now Key Acquirer.

 * dirmngr: Add option --keyserver.  Deprecate that option for gpg.
   Install a dirmngr.conf file from a skeleton for new installations.

 See-also: gnupg-announce/2015q4/000380.html


Noteworthy changes in version 2.1.8 (2015-09-10)
------------------------------------------------

 * gpg: Sending very large keys to the keyservers works again.

 * gpg: Validity strings in key listings are now again translatable.

 * gpg: Emit FAILURE status lines to help GPGME.

 * gpg: Does not anymore link to Libksba to reduce dependencies.

 * gpgsm: Export of secret keys via Assuan is now possible.

 * agent: Raise the maximum passphrase length from 100 to 255 bytes.

 * agent: Fix regression using EdDSA keys with ssh.

 * Does not anymore use a build timestamp by default.

 * The fallback encoding for broken locale settings changed
   from Latin-1 to UTF-8.

 * Many code cleanups and improved internal documentation.

 * Various minor bug fixes.

 See-also: gnupg-announce/2015q3/000379.html


Noteworthy changes in version 2.1.7 (2015-08-11)
------------------------------------------------

 * gpg: Support encryption with Curve25519 if Libgcrypt 1.7 is used.

 * gpg: In the --edit-key menu: Removed the need for "toggle", changed
   how secret keys are indicated, new commands "fpr *" and "grip".

 * gpg: More fixes related to legacy keys in a keyring.

 * gpgv: Does now also work with a "trustedkeys.kbx" file.

 * scd: Support some feature from the OpenPGP card 3.0 specs.

 * scd: Improved ECC support

 * agent: New option --force for the DELETE_KEY command.

 * w32: Look for the Pinentry at more places.

 * Dropped deprecated gpgsm-gencert.sh

 * Various other bug fixes.

 See-also: gnupg-announce/2015q3/000371.html


Noteworthy changes in version 2.1.6 (2015-07-01)
------------------------------------------------

 * agent: New option --verify for the PASSWD command.

 * gpgsm: Add command option "offline" as an alternative to
   --disable-dirmngr.

 * gpg: Do not prompt multiple times for a password in pinentry
   loopback mode.

 * Allow the use of debug category names with --debug.

 * Using gpg-agent and gpg/gpgsm with different locales will now show
   the correct translations in Pinentry.

 * gpg: Improve speed of --list-sigs and --check-sigs.

 * gpg: Make --list-options show-sig-subpackets work again.

 * gpg: Fix an export problem for old keyrings with PGP-2 keys.

 * scd: Support PIN-pads on more readers.

 * dirmngr: Properly cleanup zombie LDAP helper processes and avoid
   hangs on dirmngr shutdown.

 * Various other bug fixes.

 See-also: gnupg-announce/2015q3/000370.html


Noteworthy changes in version 2.1.5 (2015-06-11)
------------------------------------------------

 * Support for an external passphrase cache.

 * Support for the forthcoming version 3 OpenPGP smartcard.

 * Manuals now show the actual used file names.

 * Prepared for improved integration with Emacs.

 * Code cleanups and minor bug fixes.

 See-also: gnupg-announce/2015q2/000369.html


Noteworthy changes in version 2.1.4 (2015-05-12)
------------------------------------------------

 * gpg: Add command --quick-adduid to non-interactively add a new user
   id to an existing key.

 * gpg: Do no enable honor-keyserver-url by default.  Make it work if
   enabled.

 * gpg: Display the serial number in the --card-status output again.

 * agent: Support for external password managers.
   Add option --no-allow-external-cache.

 * scdaemon: Improved handling of extended APDUs.

 * Make HTTP proxies work again.

 * All network access including DNS as been moved to Dirmngr.

 * Allow building without LDAP support.

 * Fixed lots of smaller bugs.

 See-also: gnupg-announce/2015q2/000366.html


Noteworthy changes in version 2.1.3 (2015-04-11)
------------------------------------------------

 * gpg: LDAP keyservers are now supported by 2.1.

 * gpg: New option --with-icao-spelling.

 * gpg: New option --print-pka-records.  Changed the PKA method to use
   CERT records and hashed names.  [Update: --print-pka-records
   replaced in 2.1.14.]

 * gpg: New command --list-gcrypt-config.  New parameter "curve"
   for --list-config.

 * gpg: Print a NEWSIG status line like gpgsm always did.

 * gpg: Print MPI values with --list-packets and --verbose.

 * gpg: Write correct MPI lengths with ECC keys.

 * gpg: Skip legacy PGP-2 keys while searching.

 * gpg: Improved searching for mail addresses when using a keybox.

 * gpgsm: Changed default algos to AES-128 and SHA-256.

 * gpgtar: Fixed extracting files with sizes of a multiple of 512.

 * dirmngr: Fixed SNI handling for hkps pools.

 * dirmngr: extra-certs and trusted-certs are now always loaded from
   the sysconfig dir instead of the homedir.

 * Fixed possible problems due to compiler optimization, two minor
   regressions, and other bugs.

 See-also: gnupg-announce/2015q2/000365.html


Noteworthy changes in version 2.1.2 (2015-02-11)
------------------------------------------------

 * gpg: The parameter 'Passphrase' for batch key generation works
   again.

 * gpg: Using a passphrase option in batch mode now has the expected
   effect on --quick-gen-key.

 * gpg: Improved reporting of unsupported PGP-2 keys.

 * gpg: Added support for algo names when generating keys using
   --command-fd.

 * gpg: Fixed DoS based on bogus and overlong key packets.

 * agent: When setting --default-cache-ttl the value
   for --max-cache-ttl is adjusted to be not lower than the former.

 * agent: Fixed problems with the new --extra-socket.

 * agent: Made --allow-loopback-pinentry changeable with gpgconf.

 * agent: Fixed importing of unprotected openpgp keys.

 * agent: Now tries to use a fallback pinentry if the standard
   pinentry is not installed.

 * scd: Added support for ECDH.

 * Fixed several bugs related to bogus keyrings and improved some
   other code.

 See-also: gnupg-announce/2015q1/000361.html


Noteworthy changes in version 2.1.1 (2014-12-16)
------------------------------------------------

 * gpg: Detect faulty use of --verify on detached signatures.

 * gpg: New import option "keep-ownertrust".

 * gpg: New sub-command "factory-reset" for --card-edit.

 * gpg: A stub key for smartcards is now created by --card-status.

 * gpg: Fixed regression in --refresh-keys.

 * gpg: Fixed regresion in %g and %p codes for --sig-notation.

 * gpg: Fixed best matching hash algo detection for ECDSA and EdDSA.

 * gpg: Improved perceived speed of secret key listisngs.

 * gpg: Print number of skipped PGP-2 keys on import.

 * gpg: Removed the option aliases --throw-keyid and --notation-data;
   use --throw-keyids and --set-notation instead.

 * gpg: New import option "keep-ownertrust".

 * gpg: Skip too large keys during import.

 * gpg,gpgsm: New option --no-autostart to avoid starting gpg-agent or
   dirmngr.

 * gpg-agent: New option --extra-socket to provide a restricted
   command set for use with remote clients.

 * gpgconf --kill does not anymore start a service only to kill it.

 * gpg-pconnect-agent: Add convenience option --uiserver.

 * Fixed keyserver access for Windows.

 * Fixed build problems on Mac OS X

 * The Windows installer does now install development files

 * More translations (but most of them are not complete).

 * To support remotely mounted home directories, the IPC sockets may
   now be redirected.  This feature requires Libassuan 2.2.0.

 * Improved portability and the usual bunch of bug fixes.

 See-also: gnupg-announce/2014q4/000360.html


Noteworthy changes in version 2.1.0 (2014-11-06)
------------------------------------------------

 This release introduces a lot of changes.  Most of them are internal
 and thus not user visible.  However, some long standing behavior has
 slightly changed and it is strongly suggested that an existing
 "~/.gnupg" directory is backed up before this version is used.

 A verbose description of the major new features and changes can be
 found in the file doc/whats-new-in-2.1.txt.

 * gpg: All support for v3 (PGP 2) keys has been dropped.  All
   signatures are now created as v4 signatures.  v3 keys will be
   removed from the keyring.

 * gpg: With pinentry-0.9.0 the passphrase "enter again" prompt shows
   up in the same window as the "new passphrase" prompt.

 * gpg: Allow importing keys with duplicated long key ids.

 * dirmngr: May now be build without support for LDAP.

 * For a complete list of changes see the lists of changes for the
   2.1.0 beta versions below.  Note that all relevant fixes from
   versions 2.0.14 to 2.0.26 are also applied to this version.


 [Noteworthy changes in version 2.1.0-beta864 (2014-10-03)]

 * gpg: Removed the GPG_AGENT_INFO related code.  GnuPG does now
   always use a fixed socket name in its home directory.

 * gpg: Renamed --gen-key to --full-gen-key and re-added a --gen-key
   command with less choices.

 * gpg: Use SHA-256 for all signature types also on RSA keys.

 * gpg: Default keyring is now created with a .kbx suffix.

 * gpg: Add a shortcut to the key capabilies menu (e.g. "=e" sets the
   encryption capabilities).

 * gpg: Fixed obsolete options parsing.

 * Further improvements for the alternative speedo build system.


 [Noteworthy changes in version 2.1.0-beta834 (2014-09-18)]

 * gpg: Improved passphrase caching.

 * gpg: Switched to algorithm number 22 for EdDSA.

 * gpg: Removed CAST5 from the default preferences.

 * gpg: Order SHA-1 last in the hash preferences.

 * gpg: Changed default cipher for --symmetric to AES-128.

 * gpg: Fixed export of ECC keys and import of EdDSA keys.

 * dirmngr: Fixed the KS_FETCH command.

 * The speedo build system now downloads related packages and works
   for non-Windows platforms.


 [Noteworthy changes in version 2.1.0-beta783 (2014-08-14)]

 * gpg: Add command --quick-gen-key.

 * gpg: Make --quick-sign-key promote local key signatures.

 * gpg: Added "show-usage" sub-option to --list-options.

 * gpg: Screen keyserver responses to avoid importing unwanted keys
   from rogue servers.

 * gpg: Removed the option --pgp2 and --rfc1991 and the ability to
   create PGP-2 compatible messages.

 * gpg: Removed options --compress-keys and --compress-sigs.

 * gpg: Cap attribute packets at 16MB.

 * gpg: Improved output of --list-packets.

 * gpg: Make with-colons output of --search-keys work again.

 * gpgsm: Auto-create the ".gnupg" directory like gpg does.

 * agent: Fold new passphrase warning prompts into one.

 * scdaemon: Add support for the Smartcard-HSM card.

 * scdaemon: Remove the use of the pcsc-wrapper.


 [Noteworthy changes in version 2.1.0-beta751 (2014-07-03)]

 * gpg: Create revocation certificates during key generation.

 * gpg: Create exported secret keys and revocation certifciates with
   mode 0700

 * gpg: The validity of user ids is now shown by default.  To revert
   this add "list-options no-show-uid-validity" to gpg.conf.

 * gpg: Make export of secret keys work again.

 * gpg: The output of --list-packets does now print the offset of the
   packet and information about the packet header.

 * gpg: Avoid DoS due to garbled compressed data packets. [CVE-2014-4617]

 * gpg: Print more specific reason codes with the INV_RECP status.

 * gpg: Cap RSA and Elgamal keysize at 4096 bit also for unattended
   key generation.

 * scdaemon: Support reader Gemalto IDBridge CT30 and pinpad of SCT
   cyberJack go.

 * The speedo build system has been improved.  It is now also possible
   to build a partly working installer for Windows.


 [Noteworthy changes in version 2.1.0-beta442 (2014-06-05)]

 * gpg: Changed the format of key listings.  To revert to the old
   format the option --legacy-list-mode is available.

 * gpg: Add experimental signature support using curve Ed25519 and
   with a patched Libgcrypt also encryption support with Curve25519.
   [Update: this encryption support has been removed from 2.1.0 until
   we have agreed on a suitable format.]

 * gpg: Allow use of Brainpool curves.

 * gpg: Accepts a space separated fingerprint as user ID.  This
   allows to copy and paste the fingerprint from the key listing.

 * gpg: The hash algorithm is now printed for signature records in key
   listings.

 * gpg: Reject signatures made using the MD5 hash algorithm unless the
   new option --allow-weak-digest-algos or --pgp2 are given.

 * gpg: Print a warning if the Gnome-Keyring-Daemon intercepts the
   communication with the gpg-agent.

 * gpg: New option --pinentry-mode.

 * gpg: Fixed decryption using an OpenPGP card.

 * gpg: Fixed bug with deeply nested compressed packets.

 * gpg: Only the major version number is by default included in the
   armored output.

 * gpg: Do not create a trustdb file if --trust-model=always is used.

 * gpg: Protect against rogue keyservers sending secret keys.

 * gpg: The format of the fallback key listing ("gpg KEYFILE") is now
   more aligned to the regular key listing ("gpg -k").

 * gpg: The option--show-session-key prints its output now before the
   decryption of the bulk message starts.

 * gpg: New %U expando for the photo viewer.

 * gpg,gpgsm: New option --with-secret.

 * gpgsm: By default the users are now asked via the Pinentry whether
   they trust an X.509 root key.  To prohibit interactive marking of
   such keys, the new option --no-allow-mark-trusted may be used.

 * gpgsm: New commands to export a secret RSA key in PKCS#1 or PKCS#8
   format.

 * gpgsm: Improved handling of re-issued CA certificates.

 * agent: The included ssh agent does now support ECDSA keys.

 * agent: New option --enable-putty-support to allow gpg-agent on
   Windows to act as a Pageant replacement with full smartcard support.

 * scdaemon: New option --enable-pinpad-varlen.

 * scdaemon: Various fixes for pinpad equipped card readers.

 * scdaemon: Rename option --disable-pinpad (was --disable-keypad).

 * scdaemon: Better support fo CCID readers.  Now, internal CCID
   driver supports readers with no auto configuration feature.

 * dirmngr: Removed support for the original HKP keyserver which is
   not anymore used by any site.

 * dirmngr: Improved support for keyserver pools.

 * tools: New option --dirmngr for gpg-connect-agent.

 * The GNU Pth library has been replaced by the new nPth library.

 * Support installation as portable application under Windows.

 * All kind of other improvements - see the git log.


 [Noteworthy changes in version 2.1.0beta3 (2011-12-20)]

 * gpg: Fixed regression in the secret key export function.

 * gpg: Allow generation of card keys up to 4096 bit.

 * gpgsm: Preliminary support for the validation model "steed".

 * gpgsm: Improved certificate creation.

 * agent: Support the SSH confirm flag.

 * agent: New option to select a passphrase mode.  The loopback
   mode may be used to bypass Pinentry.

 * agent: The Assuan commands KILLAGENT and KILLSCD are working again.

 * scdaemon: Does not anymore block after changing a card (regression
   fix).

 * tools: gpg-connect-agent does now proberly display the help output
   for "SCD HELP" commands.


 [Noteworthy changes in version 2.1.0beta2 (2011-03-08)]

 * gpg: ECC support as described by draft-jivsov-openpgp-ecc-06.txt
   [Update: now known as RFC-6637].

 * gpg: Print "AES128" instead of "AES".  This change introduces a
   little incompatibility for tools using "gpg --list-config".  We
   hope that these tools are written robust enough to accept this new
   algorithm name as well.

 * gpgsm: New feature to create certificates from a parameter file.
   Add prompt to the --gen-key UI to create self-signed certificates.

 * agent: TMPDIR is now also honored when creating a socket using
   the --no-standard-socket option and with symcryptrun's temp files.

 * scdaemon: Fixed a bug where scdaemon sends a signal to gpg-agent
   running in non-daemon mode.

 * dirmngr: Fixed CRL loading under W32 (bug#1010).

 * Dirmngr has taken over the function of the keyserver helpers.  Thus
   we now have a specified direct interface to keyservers via Dirmngr.
   LDAP, DNS and mail backends are not yet implemented.

 * Fixed TTY management for pinentries and session variable update
   problem.


 [Noteworthy changes in version 2.1.0beta1 (2010-10-26)]

 * gpg: secring.gpg is not anymore used but all secret key operations
   are delegated to gpg-agent.  The import command moves secret keys
   to the agent.

 * gpg: The OpenPGP import command is now able to merge secret keys.

 * gpg: Encrypted OpenPGP messages with trailing data (e.g. other
   OpenPGP packets) are now correctly parsed.

 * gpg: Given sufficient permissions Dirmngr is started automagically.

 * gpg: Fixed output of "gpgconf --check-options".

 * gpg: Removed options --export-options(export-secret-subkey-passwd)
   and --simple-sk-checksum.

 * gpg: New options --try-secret-key.

 * gpg: Support DNS lookups for SRV, PKA and CERT on W32.

 * gpgsm: The --audit-log feature is now more complete.

 * gpgsm: The default for --include-cert is now to include all
   certificates in the chain except for the root certificate.

 * gpgsm: New option --ignore-cert-extension.

 * g13: The G13 tool for disk encryption key management has been
   added.

 * agent: If the agent's --use-standard-socket option is active, all
   tools try to start and daemonize the agent on the fly.  In the past
   this was only supported on W32; on non-W32 systems the new
   configure option --disable-standard-socket may now be used to
   disable this new default.

 * agent: New and changed passphrases are now created with an
   iteration count requiring about 100ms of CPU work.

 * dirmngr: Dirmngr is now a part of this package.  It is now also
   expected to run as a system service and the configuration
   directories are changed to the GnuPG name space. [Update: 2.1.0
   starts dirmngr on demand as user daemon.]

 * Support for Windows CE. [Update: This has not been tested for the
   2.1.0 release]

 * Numerical values may now be used as an alternative to the
   debug-level keywords.

 See-also: gnupg-announce/2014q4/000358.html


Version 2.0.28 (2015-06-02)
Version 2.0.27 (2015-02-18)
Version 2.0.26 (2014-08-12)
Version 2.0.25 (2014-06-30)
Version 2.0.24 (2014-06-24)
Version 2.0.23 (2014-06-03)
Version 2.0.22 (2013-10-04)
Version 2.0.21 (2013-08-19)
Version 2.0.20 (2013-05-10)
Version 2.0.19 (2012-03-27)
Version 2.0.18 (2011-08-04)
Version 2.0.17 (2011-01-13)
Version 2.0.16 (2010-07-19)
Version 2.0.15 (2010-03-09)
Version 2.0.14 (2009-12-21)


Noteworthy changes in version 2.0.13 (2009-09-04)
-------------------------------------------------

 * GPG now generates 2048 bit RSA keys by default.  The default hash
   algorithm preferences has changed to prefer SHA-256 over SHA-1.
   2048 bit DSA keys are now generated to use a 256 bit hash algorithm

 * The envvars XMODIFIERS, GTK_IM_MODULE and QT_IM_MODULE are now
   passed to the Pinentry to make SCIM work.

 * The GPGSM command --gen-key features a --batch mode and implements
   all features of gpgsm-gencert.sh in standard mode.

 * New option --re-import for GPGSM's IMPORT server command.

 * Enhanced writing of existing keys to OpenPGP v2 cards.

 * Add hack to the internal CCID driver to allow the use of some
   Omnikey based card readers with 2048 bit keys.

 * GPG now repeatly asks the user to insert the requested OpenPGP
   card.  This can be disabled with --limit-card-insert-tries=1.

 * Minor bug fixes.

 See-also: gnupg-announce/2009q3/000294.html


Noteworthy changes in version 2.0.12 (2009-06-17)
-------------------------------------------------

 * GPGSM now always lists ephemeral certificates if specified by
   fingerprint or keygrip.

 * New command "KEYINFO" for GPG_AGENT.  GPGSM now also returns
   information about smartcards.

 * Made sure not to leak file descriptors if running gpg-agent with a
   command.  Restore the signal mask to solve a problem in Mono.

 * Changed order of the confirmation questions for root certificates
   and store negative answers in trustlist.txt.

 * Better synchronization of concurrent smartcard sessions.

 * Support 2048 bit OpenPGP cards.

 * Support Telesec Netkey 3 cards.

 * The gpg-protect-tool now uses gpg-agent via libassuan.  Under
   Windows the Pinentry will now be put into the foreground.

 * Changed code to avoid a possible Mac OS X system freeze.

 See-also: gnupg-announce/2009q2/000288.html


Noteworthy changes in version 2.0.11 (2009-03-03)
-------------------------------------------------

 * Fixed a problem in SCDAEMON which caused unexpected card resets.

 * SCDAEMON is now aware of the Geldkarte.

 * The SCDAEMON option --allow-admin is now used by default.

 * GPGCONF now restarts SCdaemon if necessary.

 * The default cipher algorithm in GPGSM is now again 3DES.  This is
   due to interoperability problems with Outlook 2003 which still
   can't cope with AES.

 See-also: gnupg-announce/2009q1/000287.html


Noteworthy changes in version 2.0.10 (2009-01-12)
-------------------------------------------------

 * [gpg] New keyserver helper gpg2keys_kdns as generic DNS CERT
   lookup.  Run with --help for a short description.  Requires the
   ADNS library.

 * [gpg] New mechanisms "local" and "nodefault" for --auto-key-locate.
   Fixed a few problems with this option.

 * [gpg] New command --locate-keys.

 * [gpg] New options --with-sig-list and --with-sig-check.

 * [gpg] The option "-sat" is no longer an alias for --clearsign.

 * [gpg] The option --fixed-list-mode is now implicitly used and obsolete.

 * [gpg] New control statement %ask-passphrase for the unattended key
   generation.

 * [gpg] The algorithm to compute the SIG_ID status has been changed.

 * [gpgsm] Now uses AES by default.

 * [gpgsm] Made --output option work with --export-secret-key-p12.

 * [gpg-agent] Terminate process if the own listening socket is not
   anymore served by ourself.

 * [scdaemon] Made it more robust on W32.

 * [gpg-connect-agent] Accept commands given as command line arguments.

 * [w32] Initialized the socket subsystem for all keyserver helpers.

 * [w32] The sysconf directory has been moved from a subdirectory of
   the installation directory to %CSIDL_COMMON_APPDATA%/GNU/etc/gnupg.

 * [w32] The gnupg2.nls directory is not anymore used.  The standard
   locale directory is now used.

 * [w32] Fixed a race condition between gpg and gpgsm in the use of
   temporary file names.

 * The gpg-preset-passphrase mechanism works again.  An arbitrary
   string may now be used for a custom cache ID.

 * Admin PINs are cached again (bug in 2.0.9).

 * Support for version 2 OpenPGP cards.

 * Libgcrypt 1.4 is now required.

 See-also: gnupg-announce/2009q1/000284.html


Noteworthy changes in version 2.0.9 (2008-03-26)
------------------------------------------------

 * Gpgsm always tries to locate missing certificates from a running
   Dirmngr's cache.

 * Tweaks for Windows.

 * The Admin PIN for OpenPGP cards may now be entered with the pinpad.

 * Improved certificate chain construction.

 * Extended the PKITS framework.

 * Fixed a bug in the ambigious name detection.

 * Fixed possible memory corruption while importing OpenPGP keys (bug
   introduced with 2.0.8). [CVE-2008-1530]

 * Minor bug fixes.



Noteworthy changes in version 2.0.8 (2007-12-20)
------------------------------------------------

 * Enhanced gpg-connect-agent with a small scripting language.

 * New option --list-config for gpgconf.

 * Fixed a crash in gpgconf.

 * Gpg-agent now supports the passphrase quality bar of the latest
   Pinentry.

 * The envvars XAUTHORITY and PINENTRY_USER_DATA are now passed to the
   Pinentry.

 * Fixed the auto creation of the key stub for smartcards.

 * Fixed a rare bug in decryption using the OpenPGP card.

 * Creating DSA2 keys is now possible.

 * New option --extra-digest-algo for gpgsm to allow verification of
   broken signatures.

 * Allow encryption with legacy Elgamal sign+encrypt keys with option
   --rfc2440.

 * Windows is now a supported platform.

 * Made sure that under Windows the file permissions of the socket are
   taken into account.  This required a change of our socket emulation
   code and changed the IPC protocol under Windows.

 See-also: gnupg-announce/2007q4/000267.html


Noteworthy changes in version 2.0.7 (2007-09-10)
------------------------------------------------

 * Fixed encryption problem if duplicate certificates are in the
   keybox.

 * Made it work on Windows Vista.  Note that the entire Windows port
   is still considered Beta.

 * Add new options min-passphrase-nonalpha, check-passphrase-pattern,
   enforce-passphrase-constraints and max-passphrase-days to
   gpg-agent.

 * Add command --check-components to gpgconf.  Gpgconf now uses the
   installed versions of the programs and does not anymore search via
   PATH for them.

 See-also: gnupg-announce/2007q3/000259.html


Noteworthy changes in version 2.0.6 (2007-08-16)
------------------------------------------------

 * GPGSM does now grok --default-key.

 * GPGCONF is now aware of --default-key and --encrypt-to.

 * GPGSM does again correctly print the serial number as well the the
   various keyids.  This was broken since 2.0.4.

 * New option --validation-model and support for the chain-model.

 * Improved Windows support.

 See-also: gnupg-announce/2007q3/000258.html


Noteworthy changes in version 2.0.5 (2007-07-05)
------------------------------------------------

 * Switched license to GPLv3.

 * Basic support for Windows.  Run "./autogen.sh --build-w32" to build
   it.  As usual the mingw cross compiling toolchain is required.

 * Fixed bug when using the --p12-charset without --armor.

 * The command --gen-key may now be used instead of the
   gpgsm-gencert.sh script.

 * Changed key generation to reveal less information about the
   machine.  Bug fixes for gpg2's card key generation.

 See-also: gnupg-announce/2007q3/000255.html


Noteworthy changes in version 2.0.4 (2007-05-09)
------------------------------------------------

 * The server mode key listing commands are now also working for
   systems without the funopen/fopencookie API.

 * PKCS#12 import now tries several encodings in case the passphrase
   was not utf-8 encoded.  New option --p12-charset for gpgsm.

 * Improved the libgcrypt logging support in all modules.

 See-also: gnupg-announce/2007q2/000254.html


Noteworthy changes in version 2.0.3 (2007-03-08)
------------------------------------------------

 * By default, do not allow processing multiple plaintexts in a single
   stream.  Many programs that called GnuPG were assuming that GnuPG
   did not permit this, and were thus not using the plaintext boundary
   status tags that GnuPG provides.  This change makes GnuPG reject
   such messages by default which makes those programs safe again.
   --allow-multiple-messages returns to the old behavior. [CVE-2007-1263].

 * New --verify-option show-primary-uid-only.

 * gpgconf may now reads a global configuration file to select which
   options are changeable by a frontend.  The new applygnupgdefaults
   tool may be used by an admin to set default options for all users.

 * The PIN pad of the Cherry XX44 keyboard is now supported.  The
   DINSIG and the NKS applications are now also aware of PIN pads.

 See-also: gnupg-announce/2007q1/000252.html


Noteworthy changes in version 2.0.2 (2007-01-31)
------------------------------------------------

 * Fixed a serious and exploitable bug in processing encrypted
   packages. [CVE-2006-6235].

 * Added --passphrase-repeat to set the number of times GPG will
   prompt for a new passphrase to be repeated.  This is useful to help
   memorize a new passphrase.  The default is 1 repetition.

 * Using a PIN pad does now also work for the signing key.

 * A warning is displayed by gpg-agent if a new passphrase is too
   short.  New option --min-passphrase-len defaults to 8.

 * The status code BEGIN_SIGNING now shows the used hash algorithms.

 See-also: gnupg-announce/2007q1/000249.html


Noteworthy changes in version 2.0.1 (2006-11-28)
------------------------------------------------

 * Experimental support for the PIN pads of the SPR 532 and the Kaan
   Advanced card readers.  Add "disable-keypad" scdaemon.conf if you
   don't want it.  Does currently only work for the OpenPGP card and
   its authentication and decrypt keys.

 * Fixed build problems on some some platforms and crashes on amd64.

 * Fixed a buffer overflow in gpg2. [bug#728,CVE-2006-6169]

 See-also: gnupg-announce/2006q4/000242.html


Noteworthy changes in version 2.0.0 (2006-11-11)
------------------------------------------------

 * First stable version of a GnuPG integrating OpenPGP and S/MIME.

 See-also: gnupg-announce/2006q4/000239.html


Noteworthy changes in version 1.9.95 (2006-11-06)
-------------------------------------------------

 * Minor bug fixes.


Noteworthy changes in version 1.9.94 (2006-10-24)
-------------------------------------------------

 * Keys for gpgsm may now be specified using a keygrip.  A keygrip is
   indicated by a prefixing it with an ampersand.

 * gpgconf now supports switching the CMS cipher algo (e.g. to AES).

 * New command --gpgconf-test for all major tools. This may be used to
   check whether the configuration file is sane.


Noteworthy changes in version 1.9.93 (2006-10-18)
-------------------------------------------------

 * In --with-validation mode gpgsm will now also ask whether a root
   certificate should be trusted.

 * Link to Pth only if really necessary.

 * Fixed a pubring corruption bug in gpg2 occurring when importing
   signatures or keys with insane lengths.

 * Fixed v3 keyID calculation bug in gpg2.

 * More tweaks for certificates without extensions.


Noteworthy changes in version 1.9.92 (2006-10-11)
-------------------------------------------------

 * Bug fixes.

 See-also: gnupg-announce/2006q4/000236.html


Noteworthy changes in version 1.9.91 (2006-10-04)
-------------------------------------------------

 * New "relax" flag for trustlist.txt to allow root CA certificates
   without BasicContraints.

 * [gpg2] Removed the -k PGP 2 compatibility hack.  -k is now an
   alias for --list-keys.

 * [gpg2] Print a warning if "-sat" is used instead of "--clearsign".


Noteworthy changes in version 1.9.90 (2006-09-25)
-------------------------------------------------

 * Made readline work for gpg.

 * Cleanups und minor bug fixes.

 * Included translations from gnupg 1.4.5.


Noteworthy changes in version 1.9.23 (2006-09-18)
-------------------------------------------------

 * Regular man pages for most tools are now build directly from the
   Texinfo source.

 * The gpg code from 1.4.5 has been fully merged into this release.
   The configure option --enable-gpg is still required to build this
   gpg part.  For production use of OpenPGP the gpg version 1.4.5 is
   still recommended.  Note, that gpg will be installed under the name
   gpg2 to allow coexisting with an 1.4.x gpg.

 * API change in gpg-agent's pkdecrypt command.  Thus an older gpgsm
   may not be used with the current gpg-agent.

 * The scdaemon will now call a script on reader status changes.

 * gpgsm now allows file descriptor passing for "INPUT", "OUTPUT" and
   "MESSAGE".

 * The gpgsm server may now output a key listing to the output file
   handle. This needs to be enabled using "OPTION list-to-output=1".

 * The --output option of gpgsm has now an effect on list-keys.

 * New gpgsm commands --dump-chain and list-chain.

 * gpg-connect-agent has new options to utilize descriptor passing.

 * A global trustlist may now be used.  See doc/examples/trustlist.txt.

 * When creating a new pubring.kbx keybox common certificates are
   imported.


Noteworthy changes in version 1.9.22 (2006-07-27)
-------------------------------------------------

 * Enhanced pkcs#12 support to allow import from simple keyBags.

 * Exporting to pkcs#12 now create bag attributes so that Mozilla is
   able to import the files.

 * Fixed uploading of certain keys to the smart card.


Noteworthy changes in version 1.9.21 (2006-06-20)
-------------------------------------------------

 * New command APDU for scdaemon to allow using it for general card
   access.  Might be used through gpg-connect-agent by using the SCD
   prefix command.

 * Support for the CardMan 4040 PCMCIA reader (Linux 2.6.15 required).

 * Scdaemon does not anymore reset cards at the end of a connection.

 * Kludge to allow use of Bundesnetzagentur issued X.509 certificates.

 * Added --hash=xxx option to scdaemon's PKSIGN command.

 * Pkcs#12 files are now created with a MAC.  This is for better
   interoperability.

 * Collected bug fixes and minor other changes.


Noteworthy changes in version 1.9.20 (2005-12-20)
-------------------------------------------------

 * Importing pkcs#12 files created be recent versions of Mozilla works
   again.

 * Basic support for qualified signatures.

 * New debug tool gpgparsemail.


Noteworthy changes in version 1.9.19 (2005-09-12)
-------------------------------------------------

 * The Belgian eID card is now supported for signatures and ssh.
   Other pkcs#15 cards should work as well.

 * Fixed bug in --export-secret-key-p12 so that certificates are again
   included.


Noteworthy changes in version 1.9.18 (2005-08-01)
-------------------------------------------------

 * [gpgsm] Now allows for more than one email address as well as URIs
   and dnsNames in certificate request generation.  A keygrip may be
   given to create a request from an existing key.

 * A couple of minor bug fixes.


Noteworthy changes in version 1.9.17 (2005-06-20)
-------------------------------------------------

 * gpg-connect-agent has now features to handle Assuan INQUIRE
   commands.

 * Internal changes for OpenPGP cards. New Assuan command WRITEKEY.

 * GNU Pth is now a hard requirement.

 * [scdaemon] Support for OpenSC has been removed.  Instead a new and
   straightforward pkcs#15 modules has been written.  As of now it
   does allows only signing using TCOS cards but we are going to
   enhance it to match all the old capabilities.

 * [gpg-agent] New option --write-env-file and Assuan command
   UPDATESTARTUPTTY.

 * [gpg-agent] New option --default-cache-ttl-ssh to set the TTL for
   SSH passphrase caching independent from the other passphrases.


Noteworthy changes in version 1.9.16 (2005-04-21)
-------------------------------------------------

 * gpg-agent does now support the ssh-agent protocol and thus allows
   to use the pinentry as well as the OpenPGP smartcard with ssh.

 * New tool gpg-connect-agent as a general client for the gpg-agent.

 * New tool symcryptrun as a wrapper for certain encryption tools.

 * The gpg tool is not anymore build by default because those gpg
   versions available in the gnupg 1.4 series are far more matured.


Noteworthy changes in version 1.9.15 (2005-01-13)
-------------------------------------------------

 * Fixed passphrase caching bug.

 * Better support for CCID readers; the reader from Cherry RS 6700 USB
   does now work.


Noteworthy changes in version 1.9.14 (2004-12-22)
-------------------------------------------------

 * [gpg-agent] New option --use-standard-socket to allow the use of a
   fixed socket.  gpgsm falls back to this socket if GPG_AGENT_INFO
   has not been set.

 * Ported to MS Windows with some functional limitations.

 * New tool gpg-preset-passphrase.


Noteworthy changes in version 1.9.13 (2004-12-03)
-------------------------------------------------

 * [gpgsm] New option --prefer-system-dirmngr.

 * Minor cleanups and debugging aids.


Noteworthy changes in version 1.9.12 (2004-10-22)
-------------------------------------------------

 * [scdaemon] Partly rewrote the PC/SC code.

 * Removed the sc-investigate tool.  It is now in a separate package
   available at ftp://ftp.g10code.com/g10code/gscutils/ .

 * [gpg-agent] Fixed logging problem.


Noteworthy changes in version 1.9.11 (2004-10-01)
-------------------------------------------------

 * When using --import along with --with-validation, the imported
   certificates are validated and only imported if they are fully
   valid.

 * [gpg-agent] New option --max-cache-ttl.

 * [gpg-agent] When used without --daemon or --server, gpg-agent now
   check whether a agent is already running and usable.

 * Fixed some i18n problems.


Noteworthy changes in version 1.9.10 (2004-07-22)
-------------------------------------------------

 * Fixed a serious bug in the checking of trusted root certificates.

 * New configure option --enable-agent-pnly allows to build and
   install just the agent.

 * Fixed a problem with the log file handling.


Noteworthy changes in version 1.9.9 (2004-06-08)
------------------------------------------------

 * [gpg-agent] The new option --allow-mark-trusted is now required to
   allow gpg-agent to add a key to the trustlist.txt after user
   confirmation.

 * Creating PKCS#10 requests does now honor the key usage.


Noteworthy changes in version 1.9.8 (2004-04-29)
------------------------------------------------

 * [scdaemon] Overhauled the internal CCID driver.

 * [scdaemon] Status files named ~/.gnupg/reader_<n>.status are now
   written when using the internal CCID driver.

 * [gpgsm] New commands --dump-{,secret,external}-keys to show a very
   detailed view of the certificates.

 * The keybox gets now compressed after 3 hours and ephemeral
   stored certificates are deleted after about a day.

 * [gpg] Usability fixes for --card-edit.  Note, that this has already
   been ported back to gnupg-1.3


Noteworthy changes in version 1.9.7 (2004-04-06)
------------------------------------------------

 * Instrumented the modules for gpgconf.

 * Added support for DINSIG card applications.

 * Include the smimeCapabilities attribute with signed messages.

 * Now uses the gettext domain "gnupg2" to avoid conflicts with gnupg
   versions < 1.9.


Noteworthy changes in version 1.9.6 (2004-03-06)
------------------------------------------------

 * Code cleanups and bug fixes.


Noteworthy changes in version 1.9.5 (2004-02-21)
------------------------------------------------

 * gpg-protect-tool gets now installed into libexec as it ought to be.
   Cleaned up the build system to better comply with the coding
   standards.

 * [gpgsm] The --import command is now able to autodetect pkcs#12
   files and import secret and private keys from this file format.
   A new command --export-secret-key-p12 is provided to allow
   exporting of secret keys in PKCS\#12 format.

 * [gpgsm] The pinentry will now present a description of the key for
   whom the passphrase is requested.

 * [gpgsm] New option --with-validation to check the validity of key
   while listing it.

 * New option --debug-level={none,basic,advanced,expert,guru} to map
   the debug flags to sensitive levels on a per program base.


Noteworthy changes in version 1.9.4 (2004-01-30)
------------------------------------------------

 * Added support for the Telesec NKS 2.0 card application.

 * Added simple tool addgnupghome to create .gnupg directories from
   /etc/skel/.gnupg.

 * Various minor bug fixes and cleanups; mainly gpgsm and gpg-agent
   related.


Noteworthy changes in version 1.9.3 (2003-12-23)
------------------------------------------------

 * New gpgsm options --{enable,disable}-ocsp to validate keys using
   OCSP. This option requires a not yet released DirMngr version.
   Default is disabled.

 * The --log-file option may now be used to print logs to a socket.
   Prefix the socket name with "socket://" to enable this.  This does
   not work on all systems and falls back to stderr if there is a
   problem with the socket.

 * The options --encrypt-to and --no-encrypt-to now work the same in
   gpgsm as in gpg.  Note, they are also used in server mode.

 * Duplicated recipients are now silently removed in gpgsm.


Noteworthy changes in version 1.9.2 (2003-11-17)
------------------------------------------------

 * On card key generation is no longer done using the --gen-key
   command but from the menu provided by the new --card-edit command.

 * PINs are now properly cached and there are only 2 PINs visible.
   The 3rd PIN (CHV2) is internally syncronized with the regular PIN.

 * All kind of other internal stuff.


Noteworthy changes in version 1.9.1 (2003-09-06)
------------------------------------------------

 * Support for OpenSC is back. scdaemon supports a --disable-opensc to
   disable OpenSC use at runtime, so that PC/SC or ct-API can still be
   used directly.

 * Rudimentary support for the SCR335 smartcard reader using an
   internal driver.  Requires current libusb from CVS.

 * Bug fixes.


Noteworthy changes in version 1.9.0 (2003-08-05)
------------------------------------------------

      ====== PLEASE SEE README-alpha =======

 * gpg has been renamed to gpg2 and gpgv to gpgv2.  This is a
   temporary change to allow co-existing with stable gpg versions.

 * ~/.gnupg/gpg.conf-1.9.0 is fist tried as config file before the
   usual gpg.conf.

 * Removed the -k, -kv and -kvv commands.  -k is now an alias to
   --list-keys.  New command -K as alias for --list-secret-keys.

 * Removed --run-as-shm-coprocess feature.

 * gpg does now also use libgcrypt, libgpg-error is required.

 * New gpgsm commands --call-dirmngr and --call-protect-tool.

 * Changing a passphrase is now possible using "gpgsm --passwd"

 * The content-type attribute is now recognized and created.

 * The agent does now reread certain options on receiving a HUP.

 * The pinentry is now forked for each request so that clients with
   different environments are supported.  When running in daemon mode
   and --keep-display is not used the DISPLAY variable is ignored.

 * Merged stuff from the newpg branch and started this new
   development branch.


Version 1.4.19 (2015-02-27)
Version 1.4.18 (2014-06-30)
Version 1.4.17 (2014-06-23)
Version 1.4.16 (2013-12-18)
Version 1.4.15 (2013-10-04)
Version 1.4.14 (2013-07-25)
Version 1.4.13 (2012-12-20)
Version 1.4.12 (2012-01-30)
Version 1.4.11 (2010-10-18)
Version 1.4.10 (2009-09-02)
Version 1.4.9 (2008-03-26)
Version 1.4.8 (2007-12-20)
Version 1.4.7 (2007-03-05)
Version 1.4.6 (2006-12-06)
Version 1.4.5 (2006-08-01)
Version 1.4.4 (2006-06-25)
Version 1.4.3 (2006-04-03)
Version 1.4.2 (2005-07-26)
Version 1.4.1 (2005-03-15)
Version 1.4.0 (2004-12-16)


Noteworthy changes in version 1.3.2 (2003-05-27)
------------------------------------------------

    * New "--gnupg" option (set by default) that disables --openpgp,
      and the various --pgpX emulation options.  This replaces
      --no-openpgp, and --no-pgpX, and also means that GnuPG has
      finally grown a --gnupg option to make GnuPG act like GnuPG.

    * A bug in key validation has been fixed.  This bug only affects
      keys with more than one user ID (photo IDs do not count here),
      and results in all user IDs on a given key being treated with
      the validity of the most-valid user ID on that key.

    * Notation names that do not contain a '@' are no longer allowed
      unless --expert is set.  This is to help prevent pollution of
      the (as yet unused) IETF notation namespace.

    * Multiple trust models are now supported via the --trust-model
      option.  The options are "pgp" (web-of-trust plus trust
      signatures), "classic" (web-of-trust only), and "always"
      (identical to the --always-trust option).

    * The --personal-{cipher|digest|compression}-preferences are now
      consulted to get default algorithms before resorting to the
      last-ditch defaults of --s2k-cipher-algo, SHA1, and ZIP
      respectively.  This allows a user to set algorithms to use in a
      safe manner so they are used when legal to do so, without
      forcing them on for all messages.

    * New --primary-keyring option to designate the keyring that the
      user wants new keys imported into.

    * --s2k-digest-algo is now used for all password mangling.
      Earlier versions used both --s2k-digest-algo and --digest-algo
      for passphrase mangling.

    * Handling of --hidden-recipient or --throw-keyid messages is now
      easier - the user only needs to give their passphrase once, and
      GnuPG will try it against all of the available secret keys.

    * Care is taken to prevent compiler optimization from removing
      memory wiping code.

    * New option --no-mangle-dos-filenames so that filenames are not
      truncated in the W32 version.

    * A "convert-from-106" script has been added.  This is a simple
      script that automates the conversion from a 1.0.6 or earlier
      version of GnuPG to a 1.0.7 or later version.

    * Disabled keys are now skipped when selecting keys for
      encryption.  If you are using the --with-colons key listings to
      detect disabled keys, please see doc/DETAILS for a minor format
      change in this release.

    * Minor trustdb changes to make the trust calculations match
      common usage.

    * New command "revuid" in the --edit-key menu to revoke a user ID.
      This is a simpler interface to the old method (which still
      works) of revoking the user ID self-signature.

    * Status VALIDSIG does now also print the primary key's
      fingerprint, as well as the signature version, pubkey algorithm,
      hash algorithm, and signature class.

    * Add read-only support for the SHA-256 hash, and optional
      read-only support for the SHA-384 and SHA-512 hashes.

    * New option --enable-progress-filter for use with frontends.

    * DNS SRV records are used in HKP keyserver lookups to allow
      administrators to load balance and select keyserver ports
      automatically.  This is as specified in
      draft-shaw-openpgp-hkp-00.txt.

    * When using the "keyid!" syntax during a key export, only that
      specified key is exported.  If the key in question is a subkey,
      the primary key plus only that subkey is exported.

    * configure --disable-xxx options to disable individual algorithms
      at build time.  This can be used to build a smaller gpg binary
      for embedded uses where space is tight.  See the README file for
      the algorithms that can be used with this option, or use
      --enable-minimal to build the smallest gpg possible (disables
      all optional algorithms, disables keyserver access, and disables
      photo IDs).

    * The keyserver no-modify flag on a key can now be displayed and
      modified.

    * Note that the TIGER/192 digest algorithm is in the process of
      being dropped from the OpenPGP standard.  While this release of
      GnuPG still contains it, it is disabled by default.  To ensure
      you will still be able to use your messages with future versions
      of GnuPG and other OpenPGP programs, please do not use this
      algorithm.

    See-also: gnupg-announce/2003q2/000153.html


Noteworthy changes in version 1.3.1 (2002-11-12)
------------------------------------------------

    * Trust signature support.  This is based on the Maurer trust
      model where a user can specify the trust level along with the
      signature with multiple levels so users can delegate
      certification ability to other users, possibly restricted by a
      regular expression on the user ID.  Note that full trust
      signature support requires a regular expression parsing library.
      The regexp code from glibc 2.3.1 is included for those platforms
      that don't have working regexp functions available.  The
      configure option --disable-regex may be used to disable any
      regular expression code, which will make GnuPG ignore any trust
      signature with a regular expression included.

    * Two new commands --hidden-recipient (-R) and --hidden-encrypt-to
      encrypt to a user, but hide the identity of that user.  This is
      the same functionality as --throw-keyid, but can be used on a
      per-user basis.

    * Full algorithm names (e.g. "3DES", "SHA1", "ZIP") can now be
      used interchangeably with the short algorithm names (e.g. "S2",
      "H2", "Z1") anywhere algorithm names are used in GnuPG.


Noteworthy changes in version 1.3.0 (2002-10-18)
------------------------------------------------

    * The last piece of internal keyserver support has been removed,
      and now all keyserver access is done via the keyserver plugins.
      There is also a newer keyserver protocol used between GnuPG and
      the plugins, so plugins from earlier versions of GnuPG may not
      work properly.

    * The HKP keyserver plugin supports the new machine-readable key
      listing format for those keyservers that provide it.

    * When using a HKP keyserver with multiple DNS records (such as
      wwwkeys.pgp.net which has the addresses of multiple servers
      around the world), try all records until one succeeds.  Note
      that it depends on the LDAP library used whether the LDAP
      keyserver plugin does this as well.

    * The library dependencies for OpenLDAP seem to change fairly
      frequently, and GnuPG's configure script cannot guess all the
      combinations.  Use ./configure LDAPLIBS="-L libdir -l libs" to
      override the script and use the libraries selected.

    * Secret keys generated with --export-secret-subkeys are now
      indicated in key listings with a '#' after the "sec", and in
      --with-colons listings by showing no capabilities (no lowercase
      characters).

    * --trusted-key has been un-obsoleted, as it is useful for adding
      ultimately trusted keys from the config file.  It is identical
      to using --edit and "trust" to change a key to ultimately
      trusted.

    * Translations other than de are no longer distributed with the
      development branch.  This is due to the frequent text changes
      during development, which cause the translations to rapidly go
      out of date.


Version 1.2.8 (2006-12-07)
Version 1.2.7 (2004-12-27)
Version 1.2.6 (2004-08-25)
Version 1.2.5 (2004-07-26)
Version 1.2.4 (2003-12-23)
Version 1.2.3 (2003-08-21)
Version 1.2.2 (2003-05-01)
Version 1.2.1 (2002-10-25)
Version 1.2.0 (2002-09-21)


Noteworthy changes in version 1.1.92 (2002-09-11)
-------------------------------------------------

    * [IMPORTANT] The default configuration file is now
      ~/.gnupg/gpg.conf.  If an old ~/.gnupg/options is found it will
      still be used.  This change is required to have a more
      consistent naming scheme with forthcoming tools.

    * The use of MDCs have increased.  A MDC will be used if the
      recipients directly request it, if the recipients have AES,
      AES192, AES256, or TWOFISH in their cipher preferences, or if
      the chosen cipher has a blocksize not equal to 64 bits
      (currently this is also AES, AES192, AES256, and TWOFISH).

    * GnuPG will no longer automatically disable compression when
      processing an already-compressed file unless a MDC is being
      used.  This is to give the message a certain amount of
      resistance to the chosen-ciphertext attack while communicating
      with other programs (most commonly PGP earlier than version 7.x)
      that do not support MDCs.

    * The option --interactive now has the desired effect when
      importing keys.

    * The file permission and ownership checks on files have been
      clarified.  Specifically, the homedir (usually ~/.gnupg) is
      checked to protect everything within it.  If the user specifies
      keyrings outside this homedir, they are presumed to be shared
      keyrings and therefore *not* checked.  Configuration files
      specified with the --options option and the IDEA cipher
      extension specified with --load-extension are checked, along
      with their enclosing directories.

    * The configure option --with-static-rnd=auto allows to build gpg
      with all available entropy gathering modules included.  At
      runtime the best usable one will be selected from the list
      linux, egd, unix.  This is also the default for systems lacking
      a /dev/random device.

    * The default character set is now taken from the current locale;
      it can still be overridden by the --charset option.  Using the
      option -vvv shows the used character set.

    * [REMOVED] --emulate-checksum-bug and --emulate-3des-s2k-bug have
      been removed.


Noteworthy changes in version 1.1.91 (2002-08-04)
-------------------------------------------------

    * All modules are now linked statically; the --load-extension
      option is in general not useful anymore.  The only exception is
      to specify the deprecated idea cipher.

    * The IDEA plugin has changed.  Previous versions of the IDEA
      plugin will no longer work with GnuPG.  However, the current
      version of the plugin will work with earlier GnuPG versions.

    * When using --batch with one of the --delete-key commands, the
      key must be specified by fingerprint.  See the man page for
      details.

    * There are now various ways to restrict the ability GnuPG has to
      exec external programs (for the keyserver helpers or photo ID
      viewers).  Read the README file for the complete list.

    * New export option to leave off attribute packets (photo IDs)
      during export.  This is useful when exporting to HKP keyservers
      which do not understand attribute packets.

    * New import option to repair during import the HKP keyserver
      mangling multiple subkeys bug.  Note that this cannot completely
      repair the damaged key as some crucial data is removed by the
      keyserver, but it does at least give you back one subkey.  This
      is on by default for keyserver --recv-keys, and off by default
      for regular --import.

    * The keyserver helper programs now live in
      /usr/[local/]libexec/gnupg by default.  If you are upgrading
      from 1.0.7, you might want to delete your old copies in
      /usr/[local/]bin.  If you use an OS that does not use libexec
      for whatever reason, use configure --libexecdir=/usr/local/lib
      to place the keyserver helpers there.

    * The LDAP keyserver handler now works properly with very old
      (version 1) LDAP keyservers.


Noteworthy changes in version 1.1.90 (2002-07-01)
-------------------------------------------------

    * New commands: --personal-cipher-preferences,
      --personal-digest-preferences, and
      --personal-compress-preferences allow the user to specify which
      algorithms are to be preferred.  Note that this does not permit
      using an algorithm that is not present in the recipient's
      preferences (which would violate the OpenPGP standard).  This
      just allows sorting the preferences differently.

    * New "group" command to refer to several keys with one name.

    * A warning is issued if the user forces the use of an algorithm
      that is not listed in the recipient's preferences.

    * Full revocation key (aka "designated revoker") support.

    * The preferred hash algorithms on a key are consulted when
      encrypting a signed message to that key.  Note that this is
      disabled by default by a SHA1 preference in
      --personal-digest-preferences.

    * --cert-digest-algo allows the user to specify the hash algorithm
      to use when signing a key rather than the default SHA1 (or MD5
      for PGP2 keys).  Do not use this feature unless you fully
      understand the implications of this.

    * --pgp7 mode automatically sets all necessary options to ensure
      that the resulting message will be usable by a user of PGP 7.x.

    * New --attribute-fd command for frontends and scripts to get the
      contents of attribute packets (i.e. photos)

    * In expert mode, the user can now re-sign a v3 key with a v4
      self-signature.  This does not change the v3 key into a v4 key,
      but it does allow the user to use preferences, primary ID flags,
      etc.

    * Significantly improved photo ID support on non-unixlike
      platforms.

    * The version number has jumped ahead to 1.1.90 to skip over the
      old version 1.1 and to get ready for the upcoming 1.2.

    * ElGamal sign and encrypt is not anymore allowed in the key
      generation dialog unless in expert mode.  RSA sign and encrypt
      has been added with the same restrictions.

    * [W32] Keyserver access does work with Windows NT.


Noteworthy changes in version 1.0.7 (2002-04-29)
------------------------------------------------

    * Secret keys are now stored and exported in a new format which
      uses SHA-1 for integrity checks.  This format renders the
      Rosa/Klima attack useless.  Other OpenPGP implementations might
      not yet support this, so the option --simple-sk-checksum creates
      the old vulnerable format.

    * The default cipher algorithm for encryption is now CAST5,
      default hash algorithm is SHA-1.  This will give us better
      interoperability with other OpenPGP implementations.

    * Symmetric encrypted messages now use a fixed file size if
      possible.  This is a tradeoff: it breaks PGP 5, but fixes PGP 2,
      6, and 7.  Note this was only an issue with RFC-1991 style
      symmetric messages.

    * Photographic user ID support.  This uses an external program to
      view the images.

    * Enhanced keyserver support via keyserver "plugins".  GnuPG comes
      with plugins for the NAI LDAP keyserver as well as the HKP email
      keyserver.  It retains internal support for the HKP HTTP
      keyserver.

    * Nonrevocable signatures are now supported.  If a user signs a
      key nonrevocably, this signature cannot be taken back so be
      careful!

    * Multiple signature classes are usable when signing a key to
      specify how carefully the key information (fingerprint, photo
      ID, etc) was checked.

    * --pgp2 mode automatically sets all necessary options to ensure
      that the resulting message will be usable by a user of PGP 2.x.

    * --pgp6 mode automatically sets all necessary options to ensure
      that the resulting message will be usable by a user of PGP 6.x.

    * Signatures may now be given an expiration date.  When signing a
      key with an expiration date, the user is prompted whether they
      want their signature to expire at the same time.

    * Revocation keys (designated revokers) are now supported if
      present.  There is currently no way to designate new keys as
      designated revokers.

    * Permissions on the .gnupg directory and its files are checked
      for safety.

    * --expert mode enables certain silly things such as signing a
      revoked user id, expired key, or revoked key.

    * Some fixes to build cleanly under Cygwin32.

    * New tool gpgsplit to split OpenPGP data formats into packets.

    * New option --preserve-permissions.

    * Subkeys created in the future are not used for encryption or
      signing unless the new option --ignore-valid-from is used.

    * Revoked user-IDs are not listed unless signatures are listed too
      or we are in verbose mode.

    * There is no default comment string with ascii armors anymore
      except for revocation certificates and --enarmor mode.

    * The command "primary" in the edit menu can be used to change the
      primary UID, "setpref" and "updpref" can be used to change the
      preferences.

    * Fixed the preference handling; since 1.0.5 they were erroneously
      matched against against the latest user ID and not the given one.

    * RSA key generation.

    * Merged Stefan's patches for RISC OS in.  See comments in
      scripts/build-riscos.

    * It is now possible to sign and conventional encrypt a message (-cs).

    * The MDC feature flag is supported and can be set by using
      the "updpref" edit command.

    * The status messages GOODSIG and BADSIG are now returning the primary
      UID, encoded using %XX escaping (but with spaces left as spaces,
      so that it should not break too much)

    * Support for GDBM based keyrings has been removed.

    * The entire keyring management has been revamped.

    * The way signature stati are store has changed so that v3
      signatures can be supported. To increase the speed of many
      operations for existing keyrings you can use the new
      --rebuild-keydb-caches command.

    * The entire key validation process (trustdb) has been revamped.
      See the man page entries for --update-trustdb, --check-trustdb
      and --no-auto-check-trustdb.

    * --trusted-keys is again obsolete, --edit can be used to set the
      ownertrust of any key to ultimately trusted.

    * A subkey is never used to sign keys.

    * Read only keyrings are now handled as expected.

    See-also: gnupg-announce/2002q2/000135.html


Noteworthy changes in version 1.0.6 (2001-05-29)
------------------------------------------------

    * Security fix for a format string bug in the tty code.

    * Fixed format string bugs in all PO files.

    * Removed Russian translation due to too many bugs.  The FTP
      server has an unofficial but better translation in the contrib
      directory.

    * Fixed expire time calculation and keyserver access.

    * The usual set of minor bug fixes and enhancements.

    * non-writable keyrings are now correctly handled.

    See-also: gnupg-announce/2001q2/000123.html


Noteworthy changes in version 1.0.5 (2001-04-29)
------------------------------------------------

    * WARNING: The semantics of --verify have changed to address a
      problem with detached signature detection. --verify now ignores
      signed material given on stdin unless this is requested by using
      a "-" as the name for the file with the signed material.  Please
      check all your detached signature handling applications and make
      sure that they don't pipe the signed material to stdin without
      using a filename together with "-" on the the command line.

    * WARNING: Corrected hash calculation for input data larger than
      512M - it was just wrong, so you might notice bad signature in
      some very big files.  It may be wise to keep an old copy of
      GnuPG around.

    * Secret keys are no longer imported unless you use the new option
      --allow-secret-key-import.  This is a kludge and future versions will
      handle it in another way.

    * New command "showpref" in the --edit-key menu to show an easier
      to understand preference listing.

    * There is now the notation of a primary user ID.  For example, it
      is printed with a signature verification as the first user ID;
      revoked user IDs are not printed there anymore.  In general the
      primary user ID is the one with the latest self-signature.

    * New --charset=utf-8 to bypass all internal conversions.

    * Large File Support (LFS) is now working.

    * New options: --ignore-crc-error, --no-sig-create-check,
      --no-sig-cache, --fixed-list-mode, --no-expensive-trust-checks,
      --enable-special-filenames and --use-agent.  See man page.

    * New command --pipemode, which can be used to run gpg as a
      co-process.  Currently only the verification of detached
      signatures are working.  See doc/DETAILS.

    * Keyserver support for the W32 version.

    * Rewritten key selection code so that GnuPG can better cope with
      multiple subkeys, expire dates and so.  The drawback is that it
      is slower.

    * A whole lot of bug fixes.

    * The verification status of self-signatures are now cached. To
      increase the speed of key list operations for existing keys you
      can do the following in your GnuPG homedir (~/.gnupg):
         cp pubring.gpg pubring.gpg.save && gpg --export-all >x && \
         rm pubring.gpg && gpg --import x
      Only v4 keys (i.e not the old RSA keys) benefit from this caching.

    * New translations: Estonian, Turkish.

    See-also: gnupg-announce/2001q2/000122.html


Noteworthy changes in version 1.0.4 (2000-10-17)
------------------------------------------------

    * Fixed a serious bug which could lead to false signature verification
      results when more than one signature is fed to gpg.  This is the
      primary reason for releasing this version.

    * New utility gpgv which is a stripped down version of gpg to
      be used to verify signatures against a list of trusted keys.

    * Rijndael (AES) is now supported and listed with top preference.

    * --with-colons now works with --print-md[s].

    See-also: gnupg-announce/2000q4/000082.html


Noteworthy changes in version 1.0.3 (2000-09-18)
------------------------------------------------

    * Fixed problems with piping to/from other MS-Windows software

    * Expiration time of the primary key can be changed again.

    * Revoked user IDs are now marked in the output of --list-key

    * New options --show-session-key and --override-session-key
      to help the British folks to somewhat minimize the danger
      of this Orwellian RIP bill.

    * New options --merge-only and --try-all-secrets.

    * New configuration option --with-egd-socket.

    * The --trusted-key option is back after it left us with 0.9.5

    * RSA is supported. Key generation does not yet work but will come
      soon.

    * CAST5 and SHA-1 are now the default algorithms to protect the key
      and for symmetric-only encryption. This should solve a couple
      of compatibility problems because the old algorithms are optional
      according to RFC2440

    * Twofish and MDC enhanced encryption is now used.  PGP 7 supports
      this.  Older versions of GnuPG don't support it, so they should be
      upgraded to at least 1.0.2

    See-also: gnupg-announce/2000q3/000075.html


Noteworthy changes in version 1.0.2 (2000-07-12)
----------------------------------------------

    * Fixed expiration handling of encryption keys.

    * Add an experimental feature to do unattended key generation.

    * The user is now asked for the reason of revocation as required
      by the new OpenPGP draft.

    * There is a ~/.gnupg/random_seed file now which saves the
      state of the internal RNG and increases system performance
      somewhat.  This way the full entropy source is only used in
      cases were it is really required.
      Use the option --no-random-seed-file to disable this feature.

    * New options --ignore-time-conflict and --lock-never.

    * Some fixes for the W32 version.

    * The entropy.dll is not anymore used by the W32 version but replaced
      by code derived from Cryptlib.

    * Encryption is now much faster: About 2 times for 1k bit keys
      and 8 times for 4k keys.

    * New encryption keys are generated in a way which allows a much
      faster decryption.

    * New command --export-secret-subkeys which outputs the
      the _primary_ key with it's secret parts deleted.  This is
      useful for automated decryption/signature creation as it
      allows to keep the real secret primary key offline and
      thereby protecting the key certificates and allowing to
      create revocations for the subkeys.  See the FAQ for a
      procedure to install such secret keys.

    * Keygeneration now writes to the first writeable keyring or
      as default to the one in the homedirectory.  Prior versions
      ignored all --keyring options.

    * New option --command-fd to take user input from a file descriptor;
      to be used with --status-fd by software which uses GnuPG as a backend.

    * There is a new status PROGRESS which is used to show progress during
      key generation.

    * Support for the new MDC encryption packets.  To create them either
      --force-mdc must be use or cipher algorithm with a blocksize other
      than 64 bits is to be used.  --openpgp currently disables MDC packets
      entirely.  This option should not yet be used.

    * New option --no-auto-key-retrieve to disable retrieving of
      a missing public key from a keyserver, when a keyserver has been set.

    * Danish translation

    See-also: gnupg-announce/2000q3/000069.html


Noteworthy changes in version 1.0.1 (1999-12-16)
-----------------------------------

    * New command --verify-files.  New option --fast-list-mode.

    * $http_proxy is now used when --honor-http-proxy is set.

    * Fixed some minor bugs and the problem with conventional encrypted
      packets which did use the gpg v3 partial length headers.

    * Add Indonesian and Portugese translations.

    * Fixed a bug with symmetric-only encryption using the non-default 3DES.
      The option --emulate-3des-s2k-bug may be used to decrypt documents
      which have been encrypted this way; this should be done immediately
      as this workaround will be remove in 1.1

    * Can now handle (but not display) PGP's photo IDs. I don't know the
      format of that packet but after stripping a few bytes from the start
      it looks like a JPEG (at least my test data).  Handling of this
      package is required because otherwise it would mix up the
      self signatures and you can't import those keys.

    * Passing non-ascii user IDs on the commandline should now work in all
      cases.

    * New keys are now generated with an additional preference to Blowfish.

    * Removed the GNU Privacy Handbook from the distribution as it will go
      into a separate one.

    See-also: gnupg-announce/1999q4/000050.html


Noteworthy changes in version 1.0.0 (1999-09-07)
-----------------------------------

    * Add a very preliminary version of the GNU Privacy Handbook to
      the distribution (lynx doc/gph/index.html).

    * Changed the version number to GnuPG 2001 ;-)

    See-also: gnupg-announce/1999q3/000037.html


Noteworthy changes in version 0.9.11 (1999-09-03)
------------------------------------

    * UTF-8 strings are now correctly printed (if --charset is set correctly).
      Output of --with-colons remains C-style escaped UTF-8.

    * Workaround for a problem with PGP 5 detached signature in textmode.

    * Fixed a problem when importing new subkeys (duplicated signatures).

    See-also: gnupg-announce/1999q3/000036.html


Noteworthy changes in version 0.9.10 (1999-07-23)
------------------------------------

    * Some strange new options to help pgpgpg

    * Cleaned up the dox a bit.

    See-also: gnupg-announce/1999q3/000034.html


Noteworthy changes in version 0.9.9
-----------------------------------

    * New options --[no-]utf8-strings.

    * New edit-menu commands "enable" and "disable" for entire keys.

    * You will be asked for a filename if gpg cannot deduce one.

    * Changes to support libtool which is needed for the development
      of libgcrypt.

    * New script tools/lspgpot to help transferring assigned
      trustvalues from PGP to GnuPG.

    * New commands --lsign-key and made --sign-key a shortcut for --edit
      and sign.

    * New options (#122--126 ;-) --[no-]default-recipient[-self],
      --disable-{cipher,pubkey}-algo. See the man page.

    * Enhanced info output in case of multiple recipients and fixed exit code.

    * New option --allow-non-selfsigned-uid to work around a problem with
      the German IN way of separating signing and encryption keys.

    See-also: gnupg-announce/1999q3/000028.html


Noteworthy changes in version 0.9.8 (1999-06-26)
-----------------------------------

    * New subcommand "delsig" in the edit menu.

    * The name of the output file is not anymore the one which is
      embedded in the processed message, but the used filename with
      the extension stripped.  To revert to the old behaviour you can
      use the option --use-embedded-filename.

    * Another hack to cope with pgp2 generated detached signatures.

    * latin-2 character set works (--charset=iso-8859-2).

    * New option --with-key-data to list the public key parameters.
      New option -N to insert notations and a --set-policy-url.
      A couple of other options to allow reseting of options.

    * Better support for HPUX.

    See-also: gnupg-announce/1999q2/000016.html


Noteworthy changes in version 0.9.7 (1999-05-23)
-----------------------------------

    * Add some work arounds for a bugs in pgp 2 which led to bad signatures
      when used with canonical texts in some cases.

    * Enhanced some status outputs.

    See-also: gnupg-announce/1999q2/000000.html


Noteworthy changes in version 0.9.6 (1999-05-06)
-----------------------------------

    * Twofish is now statically linked by default. The experimental 128 bit
      version is now disabled.  Full support will be available as soon as
      the OpenPGP WG has decided on an interpretation of rfc2440.

    * Dropped support for the ancient Blowfish160 which is not OpenPGP.

    * Merged gpgm and gpg into one binary.

    * Add "revsig" and "revkey" commands to the edit menu.  It is now
      possible to revoke signature and subkeys.


Noteworthy changes in version 0.9.5 (1999-03-20)
-----------------------------------

    * New command "lsign" in the keyedit menu to create non-exportable
      signatures.  Removed --trusted-keys option.

    * A bunch of changes to the key validation code.

    * --list-trust-path now has an optional --with-colons format.

    * New command --recv-keys to import keys from an keyserver.


Noteworthy changes in version 0.9.4 (1999-03-08)
-----------------------------------

    * New configure option --enable-static-rnd=[egd|linux|unix|none]
      to select a random gathering module for static linking.

    * The original text is now verbatim copied to a cleartext signed message.

    * Bugfixes but there are still a couple of bugs.


Noteworthy changes in version 0.9.3 (1999-02-19)
-----------------------------------

    * Changed the internal design of getkey which now allows a
      efficient lookup of multiple keys and add a word match mode.

    * New options --[no-]encrypt-to.

    * Some changes to the configure stuff.  Switched to automake 1.4.
      Removed intl/ from CVS, autogen.sh now uses gettextize.

    * Preferences now include Twofish. Removed preference to Blowfish with
      a special hack to suppress the "not listed in preferences" warning;
      this is to allow us to switch completely to Twofish in the near future.

    * Changed the locking stuff.

    * Print all user ids of a good signature.


Noteworthy changes in version 0.9.2 (1999-01-01)
-----------------------------------

    * add some additional time warp checks.

    * Option --keyserver and command --send-keys to utilize HKP servers.

    * Upgraded to zlib 1.1.3 and fixed an inflate bug

    * More cleanup on the cleartext signatures.


Noteworthy changes in version 0.9.1 (1999-01-01)
-----------------------------------

    * Polish language support.

    * When querying the passphrase, the key ID of the primary key is
      displayed along with the one of the used secondary key.

    * Fixed a bug occurring when decrypting pgp 5 encrypted messages,
      fixed an infinite loop bug in the 3DES code and in the code
      which looks for trusted signatures.

    * Fixed a bug in the mpi library which caused signatures not to
      compare okay.

    * Rewrote the handling of cleartext signatures; the code is now
      better maintainable (I hope so).

    * New status output VALIDSIG only for valid signatures together
      with the fingerprint of the signer's key.


Noteworthy changes in version 0.9.0 (1998-12-23)
-----------------------------------

    * --export does now only exports rfc2440 compatible keys; the
      old behaviour is available with --export-all.
      Generation of v3 ElGamal (sign and encrypt) keys is not longer
      supported.

    * Fixed the uncompress bug.

    * Rewrote the rndunix module. There are two environment variables
      used for debugging now: GNUPG_RNDUNIX_DBG give the file to write
      debugging information (use "-" for stdout) and if GNUPG_RNDUNIX_DBGALL
      is set, all programs which are only tried are also printed.

    * New option --escape-from-lines to "dash-escape" "From " lines to
      prevent mailers to change them to ">From ".  This is not enabled by
      default because it is not in compliance with rfc2440 - however, you
      should turn it on.


Noteworthy changes in version 0.4.5 (1998-12-08)
-----------------------------------

    * The keyrings and the trustdb is now locked, so that
      other GnuPG processes won't damage these files.  You
      may want to put the option --lock-once into your options file.

    * The latest self-signatures are now used; this enables --import
      to see updated preferences etc.

    * Import of subkeys should now work.

    * Random gathering modules may now be loaded as extensions. Add
      such a module for most Unices but it is very experimental!

    * Brazilian language support.


Noteworthy changes in version 0.4.4 (1998-11-20)
-----------------------------------

    * Fixed the way the key expiration time is stored. If you have
      an expiration time on your key you should fix it with --edit-key
      and the command "expire".  I apologize for this inconvenience.

    * Add option --charset to support "koi8-r" encoding of user ids.
      (Not yet tested).

    * Preferences should now work again. You should run
      "gpgm --check-trustdb \*" to rebuild all preferences.

    * Checking of certificates should now work but this needs a lot
      of testing.  Key validation values are now cached in the
      trustdb; they should be recalculated as needed, but you may
      use --check-trustdb or --update-trustdb to do this.

    * Spanish translation by Urko Lusa.

    * Patch files are from now on signed.  See the man page
      for the new option --not-dash-escaped.

    * New syntax: --edit-key <userID> [<commands>]
      If you run it without --batch the commands are executed and then
      you are put into normal mode unless you use "quit" or "save" as
      one of the commands.  When in batch mode, the program quits after
      the last command, so you have to use "save" if you did some changes.
      It does not yet work completely, but may be used to list so the
      keys etc.


Noteworthy changes in version 0.4.3 (1998-11-08)
-----------------------------------

    * Fixed the gettext configure bug.

    * Kludge for RSA keys: keyid and length of a RSA key are
      correctly reported, but you get an error if you try to use
      this key (If you do not have the non-US version).

    * Experimental support for keyrings stored in a GDBM database.
      This is *much* faster than a standard keyring.  You will notice
      that the import gets slower with time; the reason is that all
      new keys are used to verify signatures of previous inserted
      keys.  Use "--keyring gnupg-gdbm:<name-of-gdbm-file>".  This is
      not (yet) supported for secret keys.

    * A Russian language file in the distribution (alternatives are in
      the contrib directory of the FTP servers)

    * commandline option processing now works as expected for GNU programs
      with the exception that you can't mix options and normal arguments.

    * Now --list-key lists all matching keys.  This is needed in some
      other places too.


Noteworthy changes in version 0.4.2 (1998-10-18)
-----------------------------------

    * This is only a snapshot: There are still a few bugs.

    * Fixed this huge memory leak.

    * Redesigned the trust database:  You should run "gpgm --check-trustdb".
      New command --update-trustdb, which adds new key from the public
      keyring into your trustdb

    * Fixed a bug in the armor code, leading to invalid packet errors.
      (a workaround for this was to use --no-armor).  The shorten line
      length (64 instead of 72) fixes a problem with pgp5 and keyservers.

    * comment packets are not anymore generated. "--export" filters
      them out.  One Exception:  The comment packets in a secret keyring
      are still used because they carry the factorization of the public
      prime product.

    * --import now only looks for KEYBLOCK headers, so you can now simply
      remove the "- " in front of such a header if someone accidentally signed
      such a message or the keyblock is part of a cleartext signed message.

    * --with-colons now lists the key expiration time and not anymore
      the valid period.

    * Some keyblocks created with old releases have a wrong sequence
      of packets, so that the keyservers don't accept these keys.
      Simply using "--edit-key" fixes the problem.

    * New option --force-v3-sigs to generate signed messages which are
      compatible to PGP 5.

    * Add some code to support DLD (for non ELF systems) - but this is
      not tested because my BSD box is currently broken.

    * New command "expire" in the edit-key menu.



Noteworthy changes in version 0.4.1 (1998-10-07)
-----------------------------------

    * A secondary key is used when the primary key is specified but cannot
      be used for the operation (if it is a sign-only key).

    * GNUPG can now handle concatenated armored messages:  There is still a
      bug if different kinds of messages are mixed.

    * Iterated+Salted passphrases now work.  If want to be sure that PGP5
      is able to handle them you may want to use the options
        "--s2k-mode 3 --s2k-cipher-algo cast5 --s2k-digest-algo sha1"
      when changing a passphrase.

    * doc/OpenPGP talks about OpenPGP compliance, doc/HACKING gives
      a few hints about the internal structure.

    * Checked gnupg against the August 1998 draft (07) and I believe
      it is in compliance with this document (except for one point).

    * Fixed some bugs in the import merging code and rewrote some
      code for the trustdb.


Noteworthy changes in version 0.4.0 (1998-09-18)
-----------------------------------

    * Triple DES is now supported.  Michael Roth did this piece of
      needed work.  We have now all the coded needed to be OpenPGP
      compliant.

    * Added a simple rpm spec file (see INSTALL).

    * detached and armored signatures are now using "PGP SIGNATURE",
      except when --rfc1991 is used.

    * All times which are not in the yyyy-mm-dd format are now printed
      in local time.


Noteworthy changes in version 0.3.5 (1998-09-14)
-----------------------------------

    * New option --throw-keyid to create anonymous enciphered messages.
      If gpg detects such a message it tires all available secret keys
      in turn so decode it.  This is a gnupg extension and not in OpenPGP
      but it has been discussed there and afaik some products use this
      scheme too (Suggested by Nimrod Zimmerman).

    * Fixed a bug with 5 byte length headers.

    * --delete-[secret-]key is now also available in gpgm.

    * cleartext signatures are not anymore converted to LF only.

    * Fixed a trustdb problem.  Run "gpgm --check-trustdb" to fix old
      trust dbs.

    * Building in another directory should now work.

    * Weak key detection mechanism (Niklas Hernaeus).


Noteworthy changes in version 0.3.4 (1998-08-11)
-----------------------------------

    * New options --comment and --set-filename; see g10/OPTIONS

    * yes/no, y/n localized.

    * Fixed some bugs.


Noteworthy changes in version 0.3.3 (1998-08-08)
-----------------------------------

    * IMPORTANT: I found yet another bug in the way the secret keys
      are encrypted - I did it the way pgp 2.x did it, but OpenPGP
      and pgp 5.x specify another (in some aspects simpler) method.
      To convert your secret keys you have to do this:
        1. Build the new release but don't install it and keep
           a copy of the old program.
        2. Disable the network, make sure that you are the only
           user, be sure that there are no Trojan horses etc ....
        3. Use your old gpg (version 0.3.1 or 0.3.2) and set the
           passphrases of ALL your secret keys to empty!
           (gpg --change-passphrase your-user-id).
        4. Save your ownertrusts (see the next point)
        5. rm ~/.gnupg/trustdb.gpg
        6. install the new version of gpg (0.3.3)
        7. For every secret key call "gpg --edit-key your-user-id",
           enter "passwd" at the prompt, follow the instructions and
           change your password back, enter "save" to store it.
        8. Restore the ownertrust (see next point).

    * The format of the trust database has changed; you must delete
      the old one, so gnupg can create a new one.
      IMPORTANT: Use version 0.3.1 or .2 to save your assigned ownertrusts
      ("gpgm --list-ownertrust >saved-trust"); then build this new version
      and restore the ownertrust with this new version
      ("gpgm --import-ownertrust saved-trust").  Please note that
      --list-ownertrust has been renamed to --export-ownertrust in this
      release and it does now only export defined ownertrusts.

    * The command --edit-key now provides a commandline driven menu
      which can be used for various tasks.  --sign-key is only an
      an alias to --edit-key and maybe removed in future: use the
      command "sign" of this new menu - you can select which user ids
      you want to sign.

    * Alternate user ids can now be created an signed.

    * Owner trust values can now be changed with --edit-key (trust)

    * GNUPG can now run as a coprocess; this enables sophisticated
      frontends.  tools/shmtest.c is a simple sample implementation.
      This needs some more work: all tty_xxx() are to be replaced
      by cpr_xxx() and some changes in the display logics is needed.

    * Removed options --gen-prime and --gen-random.

    * Removed option --add-key; use --edit-key instead.

    * Removed option --change-passphrase; use --edit-key instead.

    * Signatures are now checked even if the output file could not
      be created. Command "--verify" tries to find the detached data.

    * gpg now disables core dumps.

    * compress and symmetric cipher preferences are now used.
      Because there is no 3DES yet, this is replaced by Blowfish.

    * We have added the Twofish as an experimental cipher algorithm.
      Many thanks to Matthew Skala for doing this work.
      Twofish is the AES submission from Schneier et al.; see
      "www.counterpane.com/twofish.html" for more information.

    * Started with a help system: If you enter a question mark at some
      prompt; you should get a specific help for this prompt.

    * There is no more backup copy of the secret keyring.

    * A lot of new bugs. I think this release is not as stable as
      the previous one.


Noteworthy changes in version 0.3.2 (1998-07-09)
-----------------------------------

    * Fixed some bugs when using --textmode (-seat)

    * Now displays the trust status of a positive verified message.

    * Keyrings are now scanned in the sequence they are added with
      --[secret-]keyring.  Note that the default keyring is implicitly
      added as the very first one unless --no-default-keyring is used.

    * Fixed setuid and dlopen bug.


Noteworthy changes in version 0.3.1 (1998-07-06)
-----------------------------------

    * Partial headers are now written in the OpenPGP format if
      a key in a v4 packet is used.

    * Removed some unused options, removed the gnupg.sig stuff.

    * Key lookup by name now returns a key which can be used for
      the desired action.

    * New options --list-ownertrust (gpgm) to make a backup copy
      of the ownertrust values you assigned.

    * clear signature headers are now in compliance with OpenPGP.


Noteworthy changes in version 0.3.0 (1998-06-25)
-----------------------------------

    * New option --emulate-checksum-bug.  If your passphrase does not
      work anymore, use this option and --change-passphrase to rewrite
      your passphrase.

    * More complete v4 key support: Preferences and expiration time
      is set into the self signature.

    * Key generation defaults to DSA/ElGamal keys, so that new keys are
      interoperable with pgp5

    * DSA key generation is faster and key generation does not anymore
      remove entropy from the random generator (the primes are public
      parameters, so there is really no need for a cryptographic secure
      prime number generator which we had used).

    * A complete new structure for representing the key parameters.

    * Removed most public key knowledge into the cipher library.

    * Support for dynamic loading of new algorithms.

    * Moved tiger to an extension module.


Noteworthy changes in version 0.2.19 (1998-05-29)
------------------------------------

    * Replaced /dev/urandom in checks with new tool mk-tdata.

    * Some assembler file cleanups; some more functions for the Alpha.

    * Tiger has now the OpenPGP assigned number 6.  Because the OID has
      changed, old signatures using this algorithm can't be verified.

    * gnupg now encrypts the compressed packed and not any longer in the
      reverse order; anyway it can decrypt both versions. Thanks to Tom
      for telling me this (not security related) bug.

    * --add-key works and you are now able to generate subkeys.

    * It is now possible to generate ElGamal keys in v4 packets to create
      valid OpenPGP keys.

    * Some new features for better integration into MUAs.


Noteworthy changes in version 0.2.18 (1998-05-15)
------------------------------------

    * Splitted cipher/random.c, add new option "--disable-dev-random"
      to configure to support the development of a random source for
      other systems. Prepared sourcefiles rand-unix.c, rand-w32.c
      and rand-dummy.c (which is used to allow compilation on systems
      without a random source).

    * Fixed a small bug in the key generation (it was possible that 48 bits
      of a key were not taken from the random pool)

    * Add key generation for DSA and v4 signatures.

    * Add a function trap_unaligned(), so that a SIGBUS is issued on
      Alphas and not the slow emulation code is used. And success: rmd160
      raised a SIGBUS.

    * Enhanced the formatting facility of argparse and changed the use of
      \r,\v to @ because gettext does not like it.

    * New option "--compress-algo 1" to allow the creation of compressed
      messages which are readable by PGP and "--print-md" (gpgm) to make
      speed measurement easier.


Noteworthy changes in version 0.2.17 (1998-05-04)
------------------------------------

    * Comment packets are now of private type 61.

    * Passphrase code still used a 160 bit blowfish key, added a
      silly workaround. Please change your passphrase again - sorry.

    * Conventional encryption now uses a type 3 packet to describe the
      used algorithms.

    * The new algorithm number for Blowfish is 20, 16 is still used for
      encryption only; for signing it is only used when it is in a v3 packet,
      so that GNUPG keys are still valid.


Noteworthy changes in version 0.2.16 (1998-04-28)
------------------------------------

    * Add experimental support for the TIGER/192 message digest algorithm.
      (But there is only a dummy ASN OID).

    * Standard cipher is now Blowfish with 128 bit key in OpenPGP's CFB
      mode. I renamed the old cipher to Blowfish160. Because the OpenPGP
      group refused to assign me a number for Blowfish160, I have to
      drop support for this in the future. You should use
      "--change-passphrase" to recode your current passphrase with 128
      bit Blowfish.


Noteworthy changes in version 0.2.15 (1998-04-09)
------------------------------------

    * Fixed a bug with the old checksum calculation for secret keys.
      If you run the program without --batch, a warning does inform
      you if your secret key needs to be converted; simply use
      --change-passphrase to recalculate the checksum. Please do this
      soon, as the compatible mode will be removed sometime in the future.

    * CAST5 works (using the PGP's special CFB mode).

    * Again somewhat more PGP 5 compatible.

    * Some new test cases

Noteworthy changes in version 0.2.14 (1998-04-02)
------------------------------------

    * Changed the internal handling of keyrings.

    * Add support to list PGP 5 keyrings with subkeys

    * Timestamps of signatures are now verified.

    * A expiration time can now be specified during key generation.

    * Some speedups for Blowfish and SHA-1, rewrote SHA-1 transform.
      Reduced the amount of random bytes needed for key generation in
      some cases.


Noteworthy changes in version 0.2.13 (1998-03-10)
------------------------------------

    * Verify of DSA signatures works.

    * Re-implemented the slower random number generator.


Noteworthy changes in version 0.2.12 (1998-03-07)
------------------------------------

    * --delete-key checks that there is no secret key. The new
      option --delete-secret-key maybe used to delete a secret key.

    * "-kv" now works as expected. Options "--list-{keys,sigs]"
      and "--check-sigs" are now working.

    * New options "--verify" and "--decrypt" to better support integration
      into MUAs (partly done for Mutt).

    * New option "--with-colons" to make parsing of key lists easier.

Noteworthy changes in version 0.2.11 (1998-03-02)
------------------------------------

    * GPG now asks for a recipient's name if option "-r" is not used.

    * If there is no good trust path, the program asks whether to use
      the public keys anyway.

    * "--delete-key" works for public keys. What semantics shall I use
      when there is a secret key too? Delete the secret key or leave him
      and auto-regenerate the public key, next time the secret key is used?

Noteworthy changes in version 0.2.10 (1998-02-27)
------------------------------------

    * Code for the alpha is much faster (about 20 times); the data
      was misaligned and the kernel traps this, so nearly all time
      was used by system to trap the misalignments and to write
      syslog messages. Shame on me and thanks to Ralph for
      pointing me at this while drinking some beer yesterday.

    * Changed some configure options and add an option
      --disable-m-guard to remove the memory checking code
      and to compile everything with optimization on.

    * New environment variable GNUPGHOME, which can be used to set
      another homedir than ~/.gnupg.  Changed default homedir for
      Windoze version to c:/gnupg.

    * Fixed detached signatures; detached PGP signatures caused a SEGV.

    * The Windoze version works (as usual w/o a strong RNG).


Noteworthy changes in version 0.2.9 (1998-02-26)
-----------------------------------

    * Fixed FreeBSD bug.

    * Added a simple man page.

    * Switched to automake1.2f and a newer gettext.

Noteworthy changes in version 0.2.8 (1998-02-24)
-----------------------------------

    * Changed the name to GNUPG, the binaries are called gpg and gpgm.
      You must rename rename the directory "~/.g10" to ~/.gnupg/, rename
      {pub,sec}ring.g10 to {pub,sec}ring.gpg, trustdb.g10 to trustdb.gpg
      and g10.sig to gnupg.sig.

    * New or changed passphrases are now salted.


Noteworthy changes in version 0.2.7 (1998-02-18)
-----------------------------------

    * New command "gen-revoke" to create a key revocation certificate.

    * New option "homedir" to set the homedir (which defaults to "~/.g10").
      This directory is created if it does not exists (only the last
      part of the name and not the complete hierarchy)

    * Command "import" works. (Try: "finger gcrypt@ftp.guug.de|g10 --import")

    * New commands "dearmor/enarmor" for g10maint.  These are mainly
      used for internal test purposes.

    * Option --version now conforming to the GNU standards and lists
      the available ciphers, message digests and public key algorithms.

    * Assembler code for m68k (not tested).

    * "make check" works.

Noteworthy changes in version 0.2.6 (1998-02-13)
-----------------------------------

    * Option "--export" works.


Noteworthy changes in version 0.2.5 (1998-02-12)
-----------------------------------

    * Added zlib for systems which don't have it.
      Use "./configure --with-zlib" to link with the static version.

    * Generalized some more functions and rewrote the encoding of
      message digests into MPIs.

    * Enhanced the checkit script


Noteworthy changes in version 0.2.4 (1998-02-11)
-----------------------------------

    * nearly doubled the speed of the ElGamal signature verification.

    * backup copies of keyrings are created.

    * assembler stuff for Pentium; gives about 15% better performance.

    * fixed a lot of bugs.


Noteworthy changes in version 0.2.3 (1998-02-09)
-----------------------------------

    * Found a bug in the calculation of ELG fingerprints. This is now
      fixed, but all existing fingerprints and keyids for ELG keys
      are not any more valid.

    * armor should now work; including clear signed text.

    * moved some options to the new program g10maint

    * It's now 64 bit clean and runs fine on an alpha--linux.

    * Key generation is much faster now.  I fixed this by using not
      so strong random number for the primes (this was a bug because the
      ElGamal primes are public parameters and it does not make sense
      to generate them from strong random).  The real secret is the x value
      which is still generated from strong (okay: /dev/random) random bits.

    * added option "--status-fd": see g10/OPTIONS

    * We have secure memory on systems which support mlock().
      It is not complete yet, because we do not have signal handler
      which does a cleanup in very case.
      We should also check the ulimit for the user in the case
      that the admin does not have set a limit on locked pages.

    * started with internationalization support.

    * The logic to handle the web of trust is now implemented. It is
      has some bugs; but I'm going to change the algorithm anyway.
      It works by calculating the trustlevel on the fly.  It may ask
      you to provide trust parameters if the calculated trust probability
      is too low.  I will write a paper which discusses this new approach.

    * a couple of changes to the configure script.

    * New option "--quick-random" which uses a much quicker random
      number generator.  Keys generated while this option is in effect
      are flags with "INSECURE!" in the user-id.  This is a development
      only option.

    * Read support for new version packets (OpenPGP).

    * Comment packets are now of correct OpenPGP type 16. Old comment
      packets written by G10 are detected because they always start with
      a hash which is an invalid version byte.

    * The string "(INSECURE!)" is appended to a new user-id if this
      is generated on a system without a good random number generator.


Version 0.2.2 (1998-02-09)
Version 0.2.1 (1998-01-28)
Version 0.2.0 (1998-01-25)
Version 0.1.3 (1998-01-12)
Version 0.1.2 (1998-01-07)
Version 0.1.1 (1998-01-07)
Version 0.1.0 (1998-01-05)
Version 0.0.0 (1997-12-20)


 Copyright (C) 1998-2016 Free Software Foundation, Inc.
 Copyright (C) 1997-2016 Werner Koch

 This file is free software; as a special exception the author gives
 unlimited permission to copy and/or distribute it, with or without
 modifications, as long as this notice is preserved.

 This file is distributed in the hope that it will be useful, but
 WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
 implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.